PQ 200 - 2 HP three-phase peripheral impeller electric pump
The Pedrollo PQ 200 peripheral electric pump with radial suction is suitable for domestic applications, for irrigating vegetable gardens, gardens, greenhouses, lawns and other similar applications.
The operation of the peripheral pump is very simple and reliable, as the movement of the impellers in the pumping body increases the pressure of the pumped water.
The PQ 200 is recommended for pumping clean water without abrasive particles and liquids that are chemically non-aggressive for the materials from which the pump is made.
The hydraulic characteristics of this pump, combined with its compactness, suggest its use in the domestic sector. Characterized by its noise, in the new version the pump is 20% quieter.
The flow rate ranges from 5 to 80 liters per minute. The head ranges from 10 to 90 meters.
The PQ 200 must be powered by a three-phase voltage, has a horsepower of 2 HP and the temperature of the liquid to be pumped ranges from -10 degrees centigrade up to +90.
This pump has a 1 inch suction and delivery port.
Made of cast iron, steel and brass, the pump is well built, robust and very durable over time.
The installation must be carried out in well-ventilated closed places or in any case protected from the elements as its certified protection is IPX5.
- Motor connection
- THREE-PHASE
- Power (HP)
- 2
- Absorption at 230V (A)
- 8.3
- Current consumption at 400V (A)
- 4.8
- Suction mouth
- 1"
- Delivery mouth
- 1"
- Pump body
- Cast iron
- Impeller
- Brass
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Degree of protection
- IP 55
- Minimum flow rate (l./min.)
- 5
- Max. flow rate (l./min.)
- 80
- Min. head (m.)
- 10
- Max. head (m.)
- 90
- Jobs
- water supply
- Max. liquid temperature (°C)
- +90°C
- Motor voltage
- 230 V
- Height (cm)
- 21.1
- Width (cm)
- 32.25
- Depth (cm)
- 16.4
- Weight (Kg)
- 15.2
- Warranty (years)
- 2
PQ models and performance
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the PQ 100-200-300

Bearings
| Pump side motor bearing | 6204 ZZ |
| Opposite side motor bearing | 6204 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | FN-14 |
| LP diameter | 14 |
| Fixed ring LP | Graphite |
| Rotating ring LP | Ceramic |
| LP elastomer | NBR |
Mat
| 1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
| 2.1 - Seal holder cover | Brass CW617N EN 12165 |
| 3.0 - Impeller | Brass CW617N EN 12165 |
| 4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |



