-42%

PQ 90 - 1 HP three-phase peripheral impeller electric pump

Flow rate up to 40 l/min (2.4 m³/h). Head up to 90 m. 0.75 Kw (1 HP) motor.

€202.37 Tax included

165.88 Tax excluded

€348.92-42%

Make a purchase proposal

Your Offer is sent.

Your Offer is accepted, please check your inbox.

PQ 90 - 1 HP three-phase peripheral impeller electric pump
  • Use dot instead of comma

Loading

Description

The Pedrollo PQ 90 peripheral electric pump with radial suction is suitable for domestic applications or small irrigation systems.

It is also suitable for gardening and therefore for irrigation of vegetable gardens, gardens, greenhouses, lawns and other similar applications.

The operation of the peripheral pump is very simple, the impellers, thanks to their operation and movement, cause the water level to rise inside the pump body.

The PQ 90 is recommended for pumping clean water without abrasive particles and liquids that are chemically non-aggressive for the materials from which the pump is made.

With the new version, the pump is less noisy and invasive, because it is quieter and consequently also less problematic to keep at home.

The flow rate ranges from 5 to 40 liters per minute. The head ranges from 5 to 90 meters.

The PQ 90 must be powered by a single-phase voltage, has a horsepower of 1 HP and the temperature of the liquid to be pumped ranges from -10 degrees centigrade up to +90.

This pump is the only one in the series that has a 3/4 inch suction and delivery port. It is also the only one that has a mechanical seal in silicon carbide instead of ceramic.

Made of cast iron, steel and brass, the pump has a robust and solid construction.

The installation must be carried out in well-ventilated closed places or in any case protected from the elements as its certified protection is IPX5.

Data sheet
Brand Pedrollo
Reference PQ 90
In stock 18 Items
MPN 41PQT90A
Motor connection
THREE-PHASE
Power (HP)
1
Absorption at 230V (A)
4.2
Current consumption at 400V (A)
2.4
Suction mouth
3/4"
Delivery mouth
3/4"
Pump body
Cast iron
Impeller
Brass
Number of impellers
1
Crankshaft
AISI 431 stainless steel
Check valve
No
Degree of protection
IP 55
Minimum flow rate (l./min.)
5
Max. flow rate (l./min.)
40
Min. head (m.)
5
Max. head (m.)
90
Jobs
water supply
Max. liquid temperature (°C)
+90°C
Motor voltage
230 V
Height (cm)
18.1
Width (cm)
25.6
Depth (cm)
14.2
Weight (Kg)
8.9
Warranty (years)
2
Attachments

Technical sheet PQ

Models, performance curves and construction features of the PQ series Pedrollo pumps.

Download (459.67KB)

PQ models and performance

GUY
three-phase
PQ 60
PQ 61
PQ 65
PQ 80
PQ 90
PQ 100
PQ 200
PQ 300
POWER
KWHP
0.370.50
0.370.50
0.550.75
0.751
0.751
1.11.5
1.52
2.23

Construction data of the PQ 70-80-90

Pedrollo PQ pump section
Bearings
Pump side motor bearing 6203 ZZ
Opposite side motor bearing 6203 ZZ
Shaft seal
Type of seal Single Mechanical Seal
Pump side model ST1-12
LP diameter 12
Fixed ring LP Silicon carbide
Rotating ring LP Graphite
LP elastomer NBR
Mat
1.0 - Pump Body Cast iron GJL 200 EN 1561
2.1 - Seal holder cover Brass CW617N EN 12165
3.0 - Impeller Brass CW617N EN 12165
4.0 - Pump shaft EN 1.4057 stainless steel (AISI 431)
6.0 - Motor holder Aluminum EN-AB 46100
6.1 - Engine cover Aluminum EN-AB 46100
7.0 - Lantern Aluminum EN-AB 46100