PQm 90 - 1 HP single-phase peripheral impeller electric pump
Flow rate up to 40 l/min (2.4 m³/h). Head up to 90 m. 0.75 Kw (1 HP) motor.
The Pedrollo PQm 90 peripheral electric pump with radial suction is suitable for domestic applications or small irrigation systems.
It is also suitable for gardening and therefore for irrigation of vegetable gardens, gardens, greenhouses, lawns and other similar applications.
The operation of the peripheral pump is very simple, the impellers, thanks to their operation and movement, cause the water level to rise inside the pump body.
The PQm 90 is recommended for pumping clean water without abrasive particles and liquids that are chemically non-aggressive for the materials from which the pump is made.
With the new version, the pump is less noisy and invasive, because it is quieter and consequently also less problematic to keep at home.
The flow rate ranges from 5 to 40 liters per minute. The head ranges from 5 to 90 meters.
The PQm 90 must be powered by a single-phase voltage, has a horsepower of 1 HP and the temperature of the liquid to be pumped ranges from -10 degrees centigrade up to +90.
This pump is the only one in the series that has a 3/4 inch suction and delivery port. It is also the only one that has a mechanical seal in silicon carbide instead of ceramic.
Made of cast iron, steel and brass, the pump has a robust and solid construction.
The installation must be carried out in well-ventilated closed places or in any case protected from the elements as its certified protection is IPX5.
- Motor connection
- SINGLE-PHASE
- Power (Kw)
- 0.75
- Power (HP)
- 1
- Absorption at 230V (A)
- 5.6
- Capacitor
- 20 µF 450 VL
- Suction mouth
- 3/4"
- Delivery mouth
- 3/4"
- Pump body
- Cast iron
- Impeller
- Brass
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Degree of protection
- IP 44
- Minimum flow rate (l./min.)
- 5
- Max. flow rate (l./min.)
- 40
- Min. head (m.)
- 5
- Max. head (m.)
- 90
- Jobs
- water supply
- Max. liquid temperature (°C)
- +90°C
- Motor voltage
- 230 V
- Height (cm)
- 18.1
- Width (cm)
- 25.6
- Depth (cm)
- 14.2
- Weight (Kg)
- 9.9
- Warranty (years)
- 2
PQm models and performance
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the PQ 70-80-90

Bearings
| Pump side motor bearing | 6203 ZZ |
| Opposite side motor bearing | 6203 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | ST1-12 |
| LP diameter | 12 |
| Fixed ring LP | Silicon carbide |
| Rotating ring LP | Graphite |
| LP elastomer | NBR |
Mat
| 1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
| 2.1 - Seal holder cover | Brass CW617N EN 12165 |
| 3.0 - Impeller | Brass CW617N EN 12165 |
| 4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |
