-42%

PKSm 60 - Self-priming electric pump with 0.40 HP single-phase peripheral impeller

Flow rate up to 40 l/min (2.4 m³/h). Head up to 40 m. 0.30 Kw (0.40 HP) motor.

€98.36 Tax included

80.62 Tax excluded

€169.58-42%

Make a purchase proposal

Your Offer is sent.

Your Offer is accepted, please check your inbox.

PKSm 60 - Self-priming electric pump with 0.40 HP single-phase peripheral impeller
  • Use dot instead of comma

Loading

Description

The Pedrollo PKSm 60 peripheral electric pump is recommended for use in the domestic sector.

Suitable for pumping clean water that does not contain particles or liquids that could damage the components.

The PKSm 60 can be used for water distribution in conjunction with small pressure tanks, for irrigation of vegetable gardens and gardens.

The particular advantages of this pump are its compactness, reliability and economy.

The pump is supplied with a check valve on the suction side.

Data sheet
Brand Pedrollo
Reference PKSm 60
In stock 11 Items
MPN 41PNKS60A1
Motor connection
Power (Kw)
Power (HP)
Absorption at 230V (A)
2.6
Capacitor
Suction mouth
Delivery mouth
Pump body
Impeller
Number of impellers
Crankshaft
Check valve
Degree of protection
Minimum flow rate (l./min.)
5
Max. flow rate (l./min.)
40
Min. head (m.)
5
Max. head (m.)
40
Jobs
Max. liquid temperature (°C)
+60°C
Motor voltage
Height (cm)
18.3
Width (cm)
19.6
Depth (cm)
14.8
Weight (Kg)
5.6
Warranty (years)
Attachments

PKS data sheet

Construction and operating characteristics. Working curves, limits of use and dimensions of Pedrollo PKS series pumps.

Download (515.05KB)

PKSm models and performance

TYPE
single phase
PKSm 60
PKSm 65
PKSm 80
POWER
KWHP
0.370.50
0.550.75
0.751

Construction data of the PKS 60-65

Section of the Pedrollo PKS pump
Bearings
Pump side motor bearing 6201 ZZ
Opposite side motor bearing 6201 ZZ
Shaft seal
Type of seal Single Mechanical Seal
Pump side model AR-12
LP diameter 12
Fixed ring LP Ceramic
Rotating ring LP Graphite
LP elastomer NBR
Mat
1.0 - Pump Body Cast iron GJL 200 EN 1561
2.1 - Seal holder cover Brass CW617N EN 12165
3.0 - Impeller Brass CW617N EN 12165
4.0 - Pump shaft EN 1.4057 stainless steel (AISI 431)
6.0 - Motor holder Aluminum EN-AB 46100
6.1 - Engine cover DX53D EN 10346 galvanized steel
7.0 - Lantern Aluminum EN-AB 46100