PKm 300 - 3 HP single-phase peripheral impeller electric pump
The Pedrollo PKm 300 peripheral electric pump is suitable for irrigation of vegetable gardens and gardens.
Recommended for pumping clean water without abrasive particles and liquids that are chemically non-aggressive for the materials from which the pump is made.
Suitable for water distribution in conjunction with small pressure tanks.
The high noise level characteristic of the PK series has been reduced by 20% on this new version of the PKm 300.
Its small and compact size makes it the pump suitable for home use.
The PKm 300 has a 1 inch suction and delivery port.
The flow rate ranges from 5 to 90 litres per hour and the head ranges from 10 to 95 metres.
Made with high quality materials and components, such as cast iron, steel, aluminum and brass, this pump is durable and reliable.
Installation must be carried out indoors or in any case protected from the elements.
- Motor connection
- SINGLE-PHASE
- Power (Kw)
- 2.2
- Power (HP)
- 3
- Absorption at 230V (A)
- 11.5
- Capacitor
- 50 µF 450 VL
- Suction mouth
- 1"
- Delivery mouth
- 1"
- Pump body
- Cast iron
- Impeller
- Brass
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Degree of protection
- IP 55
- Minimum flow rate (l./min.)
- 5
- Max. flow rate (l./min.)
- 90
- Min. head (m.)
- 10
- Max. head (m.)
- 95
- Jobs
- irrigation
pressurization systems
water supply - Max. liquid temperature (°C)
- 60
- Motor voltage
- 230 V
- Height (cm)
- 21.2
- Width (cm)
- 37.6
- Depth (cm)
- 12.5
- Weight (Kg)
- 15.6
- Warranty (years)
- 2
PKm models and performance
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the PK 100-200-300

Bearings
| Pump side motor bearing | 6204 ZZ |
| Opposite side motor bearing | 6204 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | FN-14 |
| LP diameter | 14 |
| Fixed ring LP | Graphite |
| Rotating ring LP | Ceramic |
| LP elastomer | NBR |
Mat
| 1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
| 2.1 - Seal holder cover | Brass CW617N EN 12165 |
| 3.0 - Impeller | Brass CW617N EN 12165 |
| 4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |



