-42%

PK 90 - 1 HP three-phase peripheral impeller electric pump

Flow rate up to 40 l/min (2.4 m³/h). Head up to 82 m. 0.75 Kw (1 HP) motor.

€202.37 Tax included

165.88 Tax excluded

€348.92-42%

Make a purchase proposal

Your Offer is sent.

Your Offer is accepted, please check your inbox.

PK 90 - 1 HP three-phase peripheral impeller electric pump
  • Use dot instead of comma

Loading

Description

The Pedrollo PK 90 peripheral electric pump is suitable for domestic applications.

Suitable for water distribution in combination with small pressure tanks and for irrigating vegetable gardens and gardens.

The PK 90 pump is recommended for pumping clean water without abrasive particles and liquids that are chemically non-aggressive for the materials from which the pump is made.

The noise level has been reduced by 20% compared to the previous version.

The PK 90 is the only one in the PK series that has a 3/4 inch suction and delivery port.

The flow rate ranges from 5 to 40 liters per minute. The head ranges from 5 to 82 meters.

Made with high quality materials and components, it is resistant and reliable.

Installation must be carried out indoors or in any case protected from the elements.

The weight of the PK 90 is still low, weighing only 10 kilograms.

Data sheet
Brand Pedrollo
Reference PK 90
In stock 10 Items
Motor connection
THREE-PHASE
Power (Kw)
0.75
Power (HP)
1
Absorption at 230V (A)
4
Current consumption at 400V (A)
2.3
Suction mouth
3/4"
Delivery mouth
3/4"
Pump body
Cast iron
Impeller
Brass
Number of impellers
1
Crankshaft
AISI 431 stainless steel
Check valve
No
Degree of protection
IP 55
Minimum flow rate (l./min.)
5
Max. flow rate (l./min.)
40
Min. head (m.)
5
Max. head (m.)
82
Jobs
irrigation
water supply
Max. liquid temperature (°C)
60
Motor voltage
230 V
400 V
Height (cm)
17.9
Width (cm)
27.8
Depth (cm)
11.2
Weight (Kg)
10.1
Warranty (years)
2
Attachments

PK data sheet

Construction and operating characteristics. Working curves, limits of use and dimensions of the Pedrollo PK series pumps.

Download (410.21KB)

PK models and performance

GUY
three-phase
PK 60
PK 65
PK 70
PK 80
PK 90
PK 100
PK 200
PK 300
POWER
KWHP
0.370.50
0.500.70
0.600.85
0.751
0.751
1.11.5
1.52
2.23

Construction data of the PK 90

PK pump section
Bearings
Pump side motor bearing 6203 ZZ
Opposite side motor bearing 6203 ZZ
Shaft seal
Type of seal Single Mechanical Seal
Pump side model ST1-12
LP diameter 12
Fixed ring LP Silicon carbide
Rotating ring LP Graphite
LP elastomer NBR
Mat
1.0 - Pump Body Cast iron GJL 200 EN 1561
2.1 - Seal holder cover Brass CW617N EN 12165
3.0 - Impeller Brass CW617N EN 12165
4.0 - Pump shaft EN 1.4057 stainless steel (AISI 431)
6.0 - Motor holder Aluminum EN-AB 46100
6.1 - Engine cover Aluminum EN-AB 46100
7.0 - Lantern Aluminum EN-AB 46100