-42%

PK 80 - 1 HP three-phase peripheral impeller electric pump

Flow rate up to 50 l/min (3 m³/h). Head up to 66 m. 0.75 Kw (1 HP) motor

€175.48 Tax included

143.84 Tax excluded

€302.56-42%

Make a purchase proposal

Your Offer is sent.

Your Offer is accepted, please check your inbox.

PK 80 - 1 HP three-phase peripheral impeller electric pump
  • Use dot instead of comma

Loading

Description

The Pedrollo PK 80 peripheral electric pump is a convenient solution for irrigating vegetable gardens and gardens.

Produced for over 50 years and with millions of units sold, it is the most economical and versatile product produced by Pedrollo .

The small size, low weight and low noise make this pump suitable for home use.

The PK 80 pump is recommended for pumping clean water without abrasive particles and liquids that are chemically non-aggressive for the materials from which the pump is made.

The flow rate is from 5 to 50 liters per minute. The head is from 5 to 50 meters.

Suitable for water distribution in conjunction with small pressure tanks.

The PK 80 must be installed indoors without exposing it to the elements.

Data sheet
Brand Pedrollo
Reference PK 80
In stock 8 Items
Motor connection
THREE-PHASE
Power (Kw)
0.75
Power (HP)
1
Absorption at 230V (A)
3.8
Current consumption at 400V (A)
2.2
Suction mouth
1"
Delivery mouth
1"
Pump body
Cast iron
Impeller
Brass
Number of impellers
1
Crankshaft
AISI 431 stainless steel
Check valve
No
Degree of protection
IP 55
Minimum flow rate (l./min.)
5
Max. flow rate (l./min.)
50
Min. head (m.)
22
Max. head (m.)
66
Jobs
irrigation
water supply
Max. liquid temperature (°C)
60
Motor voltage
230 V
400 V
Height (cm)
17.9
Width (cm)
28.5
Depth (cm)
11.2
Weight (Kg)
10
Warranty (years)
2
Attachments

PK data sheet

Construction and operating characteristics. Working curves, limits of use and dimensions of the Pedrollo PK series pumps.

Download (410.21KB)

PK models and performance

GUY
three-phase
PK 60
PK 65
PK 70
PK 80
PK 90
PK 100
PK 200
PK 300
POWER
KWHP
0.370.50
0.500.70
0.600.85
0.751
0.751
1.11.5
1.52
2.23

Construction data of the PK 70-80

PK pump section
Bearings
Pump side motor bearing6203 ZZ
Opposite side motor bearing6203 ZZ
Shaft seal
Type of sealSingle Mechanical Seal
Pump side modelAR-12
LP diameter12
Fixed ring LPCeramic
Rotating ring LPGraphite
LP elastomerNBR
Mat
1.0 - Pump BodyCast iron GJL 200 EN 1561
2.1 - Seal holder coverBrass CW617N EN 12165
3.0 - ImpellerBrass CW617N EN 12165
4.0 - Pump shaftEN 1.4057 stainless steel (AISI 431)
6.0 - Motor holderAluminum EN-AB 46100
6.1 - Engine coverAluminum EN-AB 46100
7.0 - LanternAluminum EN-AB 46100