PKm 80 - 1 HP single-phase peripheral impeller electric pump
The Pedrollo PKm 80 peripheral electric pump is a convenient solution for irrigating vegetable gardens and gardens.
Produced for over 50 years and with millions of units sold, it is the most economical and versatile product produced by Pedrollo .
The small size and low weight make the PKm 80 suitable for home use.
Recommended for pumping clean water without abrasive particles and liquids that are chemically non-aggressive for the materials from which the pump is made.
The flow rate is from 5 to 50 liters per minute. The head is from 5 to 50 meters.
Suitable for water distribution in conjunction with small pressure tanks.
The PKm 80 must be installed indoors without exposing it to the elements.
- Motor connection
- SINGLE-PHASE
- Power (Kw)
- 0.75
- Power (HP)
- 1
- Absorption at 230V (A)
- 5.2
- Capacitor
- 20 µF 450 VL
- Suction mouth
- 1"
- Delivery mouth
- 1"
- Pump body
- Cast iron
- Impeller
- Brass
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Degree of protection
- IP 55
- Minimum flow rate (l./min.)
- 5
- Max. flow rate (l./min.)
- 50
- Min. head (m.)
- 22
- Max. head (m.)
- 66
- Jobs
- irrigation
water supply - Max. liquid temperature (°C)
- 60
- Motor voltage
- 230 V
- Height (cm)
- 17.9
- Width (cm)
- 28.5
- Depth (cm)
- 28.5
- Weight (Kg)
- 9.9
- Warranty (years)
- 2
PKm models and performance
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the PK 70-80

Bearings
| Pump side motor bearing | 6203 ZZ |
| Opposite side motor bearing | 6203 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | AR-12 |
| LP diameter | 12 |
| Fixed ring LP | Ceramic |
| Rotating ring LP | Graphite |
| LP elastomer | NBR |
Mat
| 1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
| 2.1 - Seal holder cover | Brass CW617N EN 12165 |
| 3.0 - Impeller | Brass CW617N EN 12165 |
| 4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |



