-42%

NKm 4/4 (10m) - 1 HP single-phase submersible electric pump

Flow rate up to 120 l/min (7.2 m³/h). Head up to 53 m. 0.75 kW (1 HP) motor. 10 m cable.

€392.72 Tax included

321.9 Tax excluded

€677.10-42%

Make a purchase proposal

Your Offer is sent.

Your Offer is accepted, please check your inbox.

NKm 4/4 (10m) - 1 HP single-phase submersible electric pump
  • Use dot instead of comma

Loading

Description

The NKm 4/4 submersible electric pump from the NK series by Pedrollo is solid and resistant.

Pedrollo used AISI 304 and AISI 431 stainless steel for a construction built to last over time.

It can pump clean water and liquids that are chemically non-aggressive for the components.

The NKm 4/4 is recommended for domestic, agricultural, and industrial applications. It is particularly suitable for water distribution in conjunction with pressure tanks, for irrigation of vegetable gardens and gardens, and for pressure boosting.

It must be installed vertically up to a maximum of 20 metres below the water level.

Data sheet
Brand Pedrollo
Reference NKm 4/4 10m
In stock 11 Items
MPN 48SN0145A1U
Motor connection
SINGLE-PHASE
Power (Kw)
0.75
Power (HP)
1
Absorption at 230V (A)
6.2
Capacitor
20 µF 450 VL
Delivery mouth
1" 1/4
Pump body
AISI 304 stainless steel
Impeller
Noryl
Number of impellers
4
Crankshaft
AISI 431 stainless steel
Check valve
No
Degree of protection
IP 68
Minimum flow rate (l./min.)
10
Max. flow rate (l./min.)
120
Min. head (m.)
16
Max. head (m.)
53
Cable length (m.)
10
Jobs
irrigation
pressurization systems
water supply
Max. liquid temperature (°C)
+40°C
Height (cm)
54.3
External diameter (cm)
13.5
Weight (Kg)
15.2
Warranty (years)
2
Attachments

Technical data sheet NK

Construction and operating characteristics. Working curves, limits of use and dimensions of Pedrollo NK series pumps.

Download (1.73MB)

NKm models and performances

TYPE
three phase
NKm 2/2
NKm 2/3
NKm 2/4
NKm 2/5
NKm 2/6
NKm 4/3
NKm 4/4
NKm 4/5
NKm 4/6
NKm 8/3
NKm 8/4
POWER
KWHP
0.370.50
0.550.75
0.751
1.11.5
1.52
0.550.75
0.751
1.11.5
1.52
1.11.5
1.52

Construction data of the NK 2 series

Bearings
Pump side motor bearing6303 2RS - C3
Opposite side engine bearing6203 ZZ - C3E
Tree holding
Type of sealDouble mechanical seal in oil chamber
Engine side modelSTA-17
LM diameter17
LM fixed ringCeramic
LM rotating ringGraphite
LM elastomerNBR
Shrinkage DN1=450 DN2=350ST1-16
LP diameter16
LP fixed ringSilicon carbide
LP rotating ringGraphite
LP elastomerNBR
Materials
2.1 - Seal holder coverStainless steel EN 1.4301 (AISI 304)
3.0 - ImpellerReinforced technopolymer
4.0 - Pump shaftStainless steel EN 1.4057 (AISI 431)
5.1 - DiffuserReinforced technopolymer
5.3 - Diaphragm/Diffuser CoverStainless steel EN 1.4301 (AISI 304)
6.2 - Engine sleeveStainless steel EN 1.4301 (AISI 304)
7.2 - Pump shirtStainless steel EN 1.4301 (AISI 304)
8.0 - Suction Grid/FilterStainless steel EN 1.4301 (AISI 304)