-42%

NKm 2/5 (10m) - 1.5 HP single-phase submersible electric pump

Flow rate up to 80 l/min (4.8 m³/h). Head up to 80 m. 1.1 kW (1.5 HP) motor. 10 m cable.

€413.24 Tax included

338.72 Tax excluded

€712.48-42%

Make a purchase proposal

Your Offer is sent.

Your Offer is accepted, please check your inbox.

NKm 2/5 (10m) - 1.5 HP single-phase submersible electric pump
  • Use dot instead of comma

Loading

Description

The NKm 2/5 submersible electric pump from the NK series by Pedrollo has a 1 HP motor.

Recommended for domestic, civil and industrial installations for the distribution of water in combination with pressure tanks, for the irrigation of vegetable gardens and gardens, for increasing pressure.

It must be installed vertically with a depth of use of up to 20 metres with a special cable.

The NKm 2/5 can pump clean water and chemically non-aggressive liquids for the components up to a maximum content of 150 grams per cubic meter of sand.

Data sheet
Brand Pedrollo
Reference NKm 2/5 10m
In stock 8 Items
MPN 48SN0125A1U
Motor connection
SINGLE-PHASE
Power (Kw)
1.1
Power (HP)
1.5
Absorption at 230V (A)
7.6
Capacitor
25 µF 450 VL
Delivery mouth
1" 1/4
Pump body
AISI 304 stainless steel
Impeller
Noryl
Number of impellers
5
Crankshaft
AISI 431 stainless steel
Check valve
No
Degree of protection
IP 68
Minimum flow rate (l./min.)
10
Max. flow rate (l./min.)
80
Min. head (m.)
40
Max. head (m.)
80
Cable length (m.)
10
Jobs
irrigation
Max. liquid temperature (°C)
+40°C
Height (cm)
57
External diameter (cm)
13.5
Weight (Kg)
15.6
Warranty (years)
2
Attachments

Technical data sheet NK

Construction and operating characteristics. Working curves, limits of use and dimensions of Pedrollo NK series pumps.

Download (1.73MB)

NKm models and performances

TYPE
three phase
NKm 2/2
NKm 2/3
NKm 2/4
NKm 2/5
NKm 2/6
NKm 4/3
NKm 4/4
NKm 4/5
NKm 4/6
NKm 8/3
NKm 8/4
POWER
KWHP
0.370.50
0.550.75
0.751
1.11.5
1.52
0.550.75
0.751
1.11.5
1.52
1.11.5
1.52

Construction data of the NK 2 series

Bearings
Pump side motor bearing6303 2RS - C3
Opposite side engine bearing6203 ZZ - C3E
Tree holding
Type of sealDouble mechanical seal in oil chamber
Engine side modelSTA-17
LM diameter17
LM fixed ringCeramic
LM rotating ringGraphite
LM elastomerNBR
Shrinkage DN1=450 DN2=350ST1-16
LP diameter16
LP fixed ringSilicon carbide
LP rotating ringGraphite
LP elastomerNBR
Materials
2.1 - Seal holder coverStainless steel EN 1.4301 (AISI 304)
3.0 - ImpellerReinforced technopolymer
4.0 - Pump shaftStainless steel EN 1.4057 (AISI 431)
5.1 - DiffuserReinforced technopolymer
5.3 - Diaphragm/Diffuser CoverStainless steel EN 1.4301 (AISI 304)
6.2 - Engine sleeveStainless steel EN 1.4301 (AISI 304)
7.2 - Pump shirtStainless steel EN 1.4301 (AISI 304)
8.0 - Suction Grid/FilterStainless steel EN 1.4301 (AISI 304)