NGA 3A-PRO - 3 HP three-phase open impeller electric pump
Flow rate up to 900 l/min (54 m³/h). Head up to 19.5 m. 2.2 Kw (3 HP) motor.
The Pedrollo NGA 3A-PRO centrifugal electric pump has an open impeller for pumping liquids relatively full of impurities.
The open impeller allows for pumping water and less-than-clean liquids without the risk of clogging the impeller. It allows the passage of solids up to 12 millimeters.
The NGA 3A-PRO is recommended for agricultural, domestic, and industrial use. It is especially suitable for transferring water from canals, rivers, tanks, and basins.
Pedrollo complete use of stainless steel wall-mounted pumps makes the pump more robust but also ensures greater cleanliness as all components in contact with liquids are made of stainless steel.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 2.2
- Power (HP)
- 3
- Suction mouth
- 2"
- Delivery mouth
- 2"
- Pump body
- AISI 316L stainless steel
- Impeller
- AISI 316L stainless steel
- Number of impellers
- 1
- Crankshaft
- AISI 316 stainless steel
- Check valve
- No
- Degree of protection
- IP 44
- Minimum flow rate (l./min.)
- 100
- Max. flow rate (l./min.)
- 900
- Min. head (m.)
- 8.5
- Max. head (m.)
- 19.5
- Jobs
- cooling systems
washing systems
water supply
water treatment plants - Max. liquid temperature (°C)
- +90°C
- Motor voltage
- 400 V
- Weight (Kg)
- 24.5
- Warranty (years)
- 2
NGA 2-3 Models and Performance - PRO
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the NGA 3D-PRO-3C-PRO-3B-PRO-3A

Bearings
| Pump side motor bearing | 6204 ZZ |
| Opposite side motor bearing | 6204 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | FN-18 V6 |
| LP diameter | 18 |
| Fixed ring LP | Graphite |
| Rotating ring LP | Ceramic |
| LP elastomer | Viton |
Mat
| 1.0 - Pump Body | EN 14401 stainless steel (AISI 316) |
| 2.1 - Seal holder cover | EN 14401 stainless steel (AISI 316) |
| 3.0 - Impeller | EN 14401 stainless steel (AISI 316) |
| 4.0 - Pump shaft | EN 1.4404 stainless steel (AISI 316L) |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |



