NGA 3C-PRO - 2 HP three-phase open impeller electric pump
Flow rate up to 770 l/min (46 m³/h). Head up to 14.8 m. 1.5 Kw (2 HP) motor.
The Pedrollo NGA 3C-PRO centrifugal electric pump is recommended for pumping clean water and chemically non-aggressive liquids for components.
The main feature of this pump is its open impeller construction. This solution, developed by Pedrollo makes the NGA 3C-PRO suitable for pumping less than completely clean liquids.
It can be used for tasks such as transferring from canals, rivers, tanks, and basins. The impeller allows the passage of solids up to 12 millimeters.
Pedrollo has built a solid and robust product. Made entirely of stainless steel, the pump is built to last.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 1.5
- Power (HP)
- 2
- Suction mouth
- 2"
- Delivery mouth
- 2"
- Pump body
- AISI 316L stainless steel
- Impeller
- AISI 316L stainless steel
- Number of impellers
- 1
- Crankshaft
- AISI 316 stainless steel
- Check valve
- No
- Degree of protection
- IP 44
- Minimum flow rate (l./min.)
- 100
- Max. flow rate (l./min.)
- 770
- Min. head (m.)
- 5.7
- Max. head (m.)
- 14.8
- Jobs
- cooling systems
washing systems
water supply
water treatment plants - Max. liquid temperature (°C)
- +90°C
- Motor voltage
- 400 V
- Weight (Kg)
- 21.9
- Warranty (years)
- 2
NGA 2-3 Models and Performance - PRO
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the NGA 3D-PRO-3C-PRO-3B-PRO-3A

Bearings
| Pump side motor bearing | 6204 ZZ |
| Opposite side motor bearing | 6204 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | FN-18 V6 |
| LP diameter | 18 |
| Fixed ring LP | Graphite |
| Rotating ring LP | Ceramic |
| LP elastomer | Viton |
Mat
| 1.0 - Pump Body | EN 14401 stainless steel (AISI 316) |
| 2.1 - Seal holder cover | EN 14401 stainless steel (AISI 316) |
| 3.0 - Impeller | EN 14401 stainless steel (AISI 316) |
| 4.0 - Pump shaft | EN 1.4404 stainless steel (AISI 316L) |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |
