NGAm 3D-PRO - 1.5 HP single-phase open impeller electric pump
Flow rate up to 700 l/min (42 m³/h). Head up to 12.5 m. 1.1 kW (1.5 HP) motor.
The Pedrollo NGAm 3D-PRO centrifugal electric pump is recommended for use in the agricultural, domestic and industrial sectors.
Pedrollo designed this pump with an open impeller, allowing it to pump relatively heavy liquids without clogging the impeller. It allows solids up to 12 millimeters in diameter to pass through.
The NGAm 3D-PRO, due to its open impeller design, is suitable for applications such as transfers from canals, rivers, tanks and basins.
The pump is made entirely of stainless steel, which guarantees greater cleanliness as all components that come into contact with water are made of stainless steel.
It has a flow rate ranging from 100 to 700 liters and a reach of 5 to 12.5 meters. The pump body supports a maximum working pressure of 10 bar .
- Motor connection
- SINGLE-PHASE
- Power (Kw)
- 1.1
- Power (HP)
- 1.5
- Suction mouth
- 2"
- Delivery mouth
- 2"
- Pump body
- AISI 316L stainless steel
- Impeller
- AISI 316L stainless steel
- Number of impellers
- 1
- Crankshaft
- AISI 316L stainless steel
- Check valve
- No
- Degree of protection
- IP 44
- Minimum flow rate (l./min.)
- 100
- Max. flow rate (l./min.)
- 700
- Min. head (m.)
- 5
- Max. head (m.)
- 12.5
- Jobs
- cooling systems
washing systems
water supply
water treatment plants - Max. liquid temperature (°C)
- +90°C
- Motor voltage
- 230 V
- Weight (Kg)
- 20.2
- Warranty (years)
- 2
Models and performances NGAm 2-3 - PRO
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the NGA 3D-PRO-3C-PRO-3B-PRO-3A

Bearings
| Pump side motor bearing | 6204 ZZ |
| Opposite side motor bearing | 6204 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | FN-18 V6 |
| LP diameter | 18 |
| Fixed ring LP | Graphite |
| Rotating ring LP | Ceramic |
| LP elastomer | Viton |
Mat
| 1.0 - Pump Body | EN 14401 stainless steel (AISI 316) |
| 2.1 - Seal holder cover | EN 14401 stainless steel (AISI 316) |
| 3.0 - Impeller | EN 14401 stainless steel (AISI 316) |
| 4.0 - Pump shaft | EN 1.4404 stainless steel (AISI 316L) |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |



