-42%

MK 8/6 - 3 HP three-phase vertical multistage electric pump

Flow rate up to 180 l/min (10.8 m³/h). Head up to 84 m. 2.2 Kw (3 HP) motor.

€560.42 Tax included

459.36 Tax excluded

€966.24-42%

 Last items in stock
Make a purchase proposal

Your Offer is sent.

Your Offer is accepted, please check your inbox.

MK 8/6 - 3 HP three-phase vertical multistage electric pump
  • Use dot instead of comma

Loading

Description

The MK 8/6 multi-impeller centrifugal electric pump from the MK series by Pedrollo has a horsepower of 3 HP.

It must be powered by single-phase voltage. The temperature of the liquid being pumped ranges from -10 degrees Celsius to +60 degrees Celsius.

The flow rate ranges from 40 to 180 meters and the head from 18.5 to 84 liters. The maximum pressure of the pump body is 11 bar .

The MK 8/6 are recommended for the agricultural, civil and domestic sectors.

Ideal for water supply, for the transfer of clean liquids, for the pressurization of domestic, civil and agricultural systems and for the irrigation of vegetable gardens and gardens.

Data sheet
Brand Pedrollo
Reference MK 8/6
In stock 2 Items
MPN 43PM0806A
Motor connection
THREE-PHASE
Power (Kw)
2.2
Power (HP)
3
Absorption at 230V (A)
8.7
Current consumption at 400V (A)
5
Suction mouth
1" 1/4
Delivery mouth
1"
Pump body
AISI 304 stainless steel
Impeller
Noryl
Number of impellers
6
Crankshaft
Stainless steel EN 10088-3 1.4104
Check valve
No
Degree of protection
IP 44
Minimum flow rate (l./min.)
40
Max. flow rate (l./min.)
180
Min. head (m.)
18.5
Max. head (m.)
84
Jobs
fire prevention systems
irrigation
pressurization systems
washing systems
water supply
Max. liquid temperature (°C)
+40°C
Height (cm)
53.1
Width (cm)
18.5
Depth (cm)
22.3
Weight (Kg)
22.8
Warranty (years)
2
Attachments

Technical data sheet MK

Models, performance curves and construction features of the Pedrollo MK series pumps.

Download (329.5KB)

MK models and performance

TYPE
single phase
MK 3/3
MK 3/5
MK 3/6
MK 5/4
MK 5/5
MK 5/7
MK 5/8
MK 8/4
MK 8/5
MK 8/6
POWER
KWHP
0.751
1.11.5
1.52
0.751
1.11.5
1.52
2.23
1.11.5
1.52
2.23

Construction data of the MK series

MK pump cutaway
Bearings
Pump side motor bearing6304 ZZ
Opposite side engine bearing6204 ZZ
Tree holding
Type of sealSingle Mechanical Seal
Shrinkage DN1=450 DN2=350FN-18
LP diameter18
LP fixed ringGraphite
LP rotating ringCeramic
LP elastomerNBR
Materials
1.1 - Suction BodyCast iron GJL 200 EN 1561
1.2 - Pressing BodyCast iron GJL 200 EN 1561
3.0 - ImpellerReinforced technopolymer
4.0 - Pump shaftStainless steel EN 1.4057 (AISI 431)
5.1 - DiffuserReinforced technopolymer
5.2 - Wear ringPTFE
5.3 - Diaphragm/Diffuser CoverStainless steel EN 1.4301 (AISI 304)
6.0 - Motor holderEN-AB 46100 aluminium
7.2 - Pump shirtStainless steel EN 1.4301 (AISI 304)