MKm 3/5 - 1.5 HP single-phase vertical multistage electric pump
Flow rate up to 80 l/min (4.8 m³/h). Head up to 87 m. 1.1 Kw (1.5 HP) motor.
The MKm 3/5 multi-impeller centrifugal electric pump from the MK series by Pedrollo is compact and economical.
Suitable for domestic, civil, and agricultural applications. Especially for water supply, transferring clean liquids, boosting domestic systems, and irrigating gardens and orchards.
It must be powered by a single-phase voltage and has a horsepower of 1.5 HP.
The temperature of the liquid to be pumped ranges from -10 degrees centigrade up to +60.
The flow rate ranges from 10 to 80 liters per minute and the head from 10 to 80 meters. The maximum supported pressure is 11 bar .
The MKm 3/5 is made of materials such as cast iron, stainless steel and noryl which give solidity and resistance to the electric pump.
- Motor connection
- SINGLE-PHASE
- Power (Kw)
- 1.1
- Power (HP)
- 1.5
- Absorption at 230V (A)
- 7
- Capacitor
- 25 µF 450 VL
- Suction mouth
- 1" 1/4
- Delivery mouth
- 1"
- Pump body
- Cast iron
- Impeller
- Noryl
- Number of impellers
- 5
- Crankshaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- No
- Degree of protection
- IP 44
- Minimum flow rate (l./min.)
- 10
- Max. flow rate (l./min.)
- 80
- Min. head (m.)
- 48
- Max. head (m.)
- 87
- Jobs
- fire prevention systems
irrigation
pressurization systems
washing systems
water supply - Max. liquid temperature (°C)
- +40°C
- Height (cm)
- 50.4
- Width (cm)
- 18.5
- Depth (cm)
- 22.3
- Weight (Kg)
- 20
- Warranty (years)
- 2
MKm models and performance
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the MK series

Bearings
| Pump side motor bearing | 6304 ZZ |
| Opposite side engine bearing | 6204 ZZ |
Tree holding
| Type of seal | Single Mechanical Seal |
| Shrinkage DN1=450 DN2=350 | FN-18 |
| LP diameter | 18 |
| LP fixed ring | Graphite |
| LP rotating ring | Ceramic |
| LP elastomer | NBR |
Materials
| 1.1 - Suction Body | Cast iron GJL 200 EN 1561 |
| 1.2 - Pressing Body | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Reinforced technopolymer |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 5.1 - Diffuser | Reinforced technopolymer |
| 5.2 - Wear ring | PTFE |
| 5.3 - Diaphragm/Diffuser Cover | Stainless steel EN 1.4301 (AISI 304) |
| 6.0 - Motor holder | EN-AB 46100 aluminium |
| 7.2 - Pump shirt | Stainless steel EN 1.4301 (AISI 304) |



