-28%

FN-24 KU SIC - 24 mm mechanical seal

Spare part for HT 15/6, HT 15/7, HT 22/6, HT 22/7, HT 22/8, HT 30/5, HT 30/6, HT 30/7, HT 30/8, HT 15/6-PRO, HT 15/7-PRO, HT 22/6-PRO, HT 22/7-PRO, HT 22/8-PRO, HT 30/5-PRO, HT 30/6-PRO, HT 30/7-PRO, HT 30/8-PRO. Code 11516402404.

€43.04 Tax included

35.28 Tax excluded

€59.78-28%

Make a purchase proposal

Your Offer is sent.

Your Offer is accepted, please check your inbox.

FN-24 KU SIC - 24 mm mechanical seal
  • Use dot instead of comma

Loading

Description

The Pedrollo FN-24 KU SIC mechanical seal is mainly used in medium and large Pedrollo surface electric pumps.

It has a reduced installation length, standardised according to EN 12756, and is reinforced thanks to the use of silicon carbide.

Suitable for electric pumps with a 24 mm crankshaft.

The FN-24 KU SIC mechanical seal is mainly used on HT pumps.

The mechanical seal's job is to keep the hydraulic part separate from the electrical part. It prevents water from reaching the bearings and motor.

The FN-24 KU SIC seal allows shaft rotation without the use of a rigid seal.

The seal consists of two parts: a rotating one and a fixed one. Made of graphite, silicon carbide, NBR, and AISI 316L stainless steel.

The seal inside the electric pump is one of the most stressed parts and is therefore subject to wear. It's important to replace it when water is found in the motor.

Original spare part for model HT 15/6, HT 15/7, HT 22/6, HT 22/7, HT 22/8, HT 30/5, HT 30/6, HT 30/7, HT 30/8, HT 15/6-PRO, HT 15/7-PRO, HT 22/6-PRO, HT 22/7-PRO, HT 22/8-PRO, HT 30/5-PRO, HT 30/6-PRO, HT 30/7-PRO, HT 30/8-PRO.

Data sheet
Brand Pedrollo
Reference FN-24 KU SIC
In stock 50 Items
MPN 11516402404