MCm 30/65 - 3 HP single-phase, dual-channel electric sewage pumps
Flow rate up to 1500 l/min (90 m³/h). Head up to 13 m. 2.2 Kw (3 HP) motor.
The MCm 30/65 submersible electric pump from Pedrollo 's MC series is among the best equipped with a dual-channel impeller.
Suitable for draining water containing solids with a maximum diameter of 65 millimetres.
Suitable for conveying waste water and sewage, waste water, water mixed with sludge, groundwater and surface water.
For applications in condominiums, public buildings, industries, multi-storey car parks, underground car parks and washing areas.
It can be installed up to 10 meters below the water level. For continuous operation, it requires a depth of 320 mm.
- Motor connection
- SINGLE-PHASE
- Power (Kw)
- 2.2
- Power (HP)
- 3
- Absorption at 230V (A)
- 15.2
- Capacitor
- 60 µF 450 VL
- Delivery mouth
- 3"
- Pump body
- Cast iron
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Degree of protection
- IP 68
- Minimum flow rate (l./min.)
- 200
- Max. flow rate (l./min.)
- 1500
- Min. head (m.)
- 2
- Max. head (m.)
- 13
- Cable length (m.)
- 10
- Jobs
- drainage
drying up
slightly dirty waters - Max. liquid temperature (°C)
- +40°C
- Height (cm)
- 57.7
- Weight (Kg)
- 45
- Warranty (years)
- 2
Models and performances MCm 50-65
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the MC 50 series

Bearings
| Pump side motor bearing | 6305 CM D 6 |
| Opposite side engine bearing | 6204 ZZ-C3 |
Tree holding
| Type of seal | Double Mechanical Seal in tandem with oil chamber |
| Engine side model | STA-22 |
| LM diameter | 22 |
| LM fixed ring | Ceramic |
| LM rotating ring | Graphite |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | STA-20 |
| LP diameter | 20 |
| LP fixed ring | Silicon carbide |
| LP rotating ring | Silicon carbide |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Motor holder | Cast iron GJL 200 EN 1561 |
| 6.1 - Engine cover | Cast iron GJL 200 EN 1561 |



