HT 3/9-PRO - 4 HP three-phase vertical multistage electric pump
The Pedrollo HT 3/9-PRO centrifugal electric pump is designed to guarantee excellent performance and solid construction despite its compact size.
Made entirely of stainless steel, the pump is robust and resistant.
The HT 3/9-PRO is made with a special multi-stage construction, the operating noise is particularly low.
Recommended for pumping clean water and liquids that are not chemically aggressive towards the materials from which the pump is made.
Ideal for civil, agricultural and industrial sectors. In particular, the HT 3/9-PRO is suitable for water distribution in combination with pressure tanks, for increasing pressure in the network, for fire-fighting systems, for washing systems and for irrigation.
It must be powered by a three-phase voltage, has a horsepower of 4 HP and the temperature of the liquid to be pumped ranges from -15 degrees centigrade up to 90.
The flow rate ranges from 5 to 90 metres and the head from 78 to 146 litres.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 3
- Power (HP)
- 4
- Suction mouth
- 1"
- Delivery mouth
- 1"
- Pump body
- AISI 304 stainless steel
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 9
- Check valve
- No
- Minimum flow rate (l./min.)
- 5
- Max. flow rate (l./min.)
- 90
- Min. head (m.)
- 78
- Max. head (m.)
- 146
- Jobs
- fire prevention systems
irrigation
pressurization systems
washing systems
water supply - Height (cm)
- 71.1
- Width (cm)
- 25.0
- Depth (cm)
- 25.7
- Weight (Kg)
- 46.2
- Warranty (years)
- 2
Models and performance HT 3 - PRO
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the HT 3 PRO series

Bearings
| Pump side motor bearing | 6304 2RS-C3 |
| Opposite side engine bearing | 6204 ZZ-C3E |
Tree holding
| Type of seal | Single Mechanical Seal |
| Shrinkage DN1=450 DN2=350 | FN-18 |
| LP diameter | 18 |
| LP fixed ring | Graphite |
| LP rotating ring | Ceramic |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Stainless steel EN 1.4301 (AISI 304) |
| 2.0 - Lid | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
| 4.0 - Pump shaft | Stainless steel EN 1.4404 (AISI 316L) |
| 5.1 - Diffuser | Stainless steel EN 1.4301 (AISI 304) |
| 7.2 - Pump shirt | Stainless steel EN 1.4301 (AISI 304) |



