HT 10/8 - 5.5 HP three-phase vertical multistage electric pump
Flow rate up to 250 l/min (12 m³/h). Head up to 124 m. Motor 4 Kw (5.5 HP).
The HT 10/8 multi-impeller centrifugal electric pump by Pedrollo is ideal for use in domestic, civil and agricultural fields.
This electric pump is designed to ensure high and reliable performance despite its compact size.
Its silence makes the HT 10/8 ideal for water distribution in combination with pressure tanks, for increasing pressure in the network, for fire-fighting systems, for washing systems and for irrigation.
The flow rate ranges from 30 to 250 liters per minute. The head ranges from 34.5 to 124 meters.
The HT 10/8 must be powered by a three-phase voltage, has a horsepower of 5.5 HP and the temperature of the liquid to be pumped ranges from -15 degrees centigrade up to +90.
The pump is made with a mix of stainless steel, including the 3 impellers, and cast iron which guarantee that the pump has excellent strength and resistance.
With the multi-stage construction, the operating noise is particularly low.
The HT 10/8 must be installed indoors or in any case protected from the elements.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 4
- Power (HP)
- 5.5
- Absorption at 230V (A)
- 14.4
- Current consumption at 400V (A)
- 8.3
- Suction mouth
- 1" 1/2
- Delivery mouth
- 1" 1/2
- Pump body
- Cast iron
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 3
- Crankshaft
- AISI 304 stainless steel
- Check valve
- No
- Degree of protection
- IP 44
- Minimum flow rate (l./min.)
- 30
- Max. flow rate (l./min.)
- 250
- Min. head (m.)
- 34.5
- Max. head (m.)
- 124
- Jobs
- fire prevention systems
irrigation
pressurization systems
washing systems
water supply - Max. liquid temperature (°C)
- +90°C
- Motor voltage
- 230 V
400 V - Height (cm)
- 69
- Width (cm)
- 28
- Depth (cm)
- 25.7
- Weight (Kg)
- 52.8
- Warranty (years)
- 2
Construction data of the HT 5/6

Bearings
| Pump side motor bearing | 6307 2RS-C3 |
| Opposite side engine bearing | 6206 2RS-C3 |
Tree holding
| Type of seal | Single Mechanical Seal |
| Shrinkage DN1=450 DN2=350 | FN-18 |
| LP diameter | 18 |
| LP fixed ring | Graphite |
| LP rotating ring | Ceramic |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Cast iron GJL 250 EN 1561 |
| 2.0 - Lid | Cast iron GJL 250 EN 1561 |
| 3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 5.1 - Diffuser | Stainless steel EN 1.4301 (AISI 304) |
| 7.2 - Pump shirt | Stainless steel EN 1.4301 (AISI 304) |
