HT 10/6 - 4 HP three-phase vertical multistage electric pump
The HT 10/6 multi-impeller centrifugal electric pump by Pedrollo is ideal for applications in the domestic, civil, agricultural and industrial fields.
Recommended for pumping clean water and liquids that are not chemically aggressive towards the materials from which the pump is made.
This electric pump is designed to ensure high hydraulic performance combined with a mechanical construction that is robust and compact.
The silence and great reliability make the HT 10/6 ideal for applications in the domestic, civil and agricultural fields, in particular for the distribution of water in combination with pressure tanks, for increasing pressure in the network, for fire-fighting systems, for washing systems and for irrigation.
The flow rate ranges from 30 to 250 liters per minute. The head ranges from 26 to 93 meters.
The HT 10/6 must be powered by a three-phase voltage, has a horsepower of 4 HP and the temperature of the liquid to be pumped ranges from -15 degrees centigrade up to +90.
The pump is made of AISI 431 stainless steel, including the 3 impellers, and cast iron which guarantee good strength, resistance and allow it to last a long time.
With the multi-stage construction, the operating noise is particularly low.
The HT 10/6 must be installed indoors or in any case protected from the elements.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 3
- Power (HP)
- 4
- Absorption at 230V (A)
- 11.2
- Current consumption at 400V (A)
- 6.5
- Suction mouth
- 1" 1/2
- Delivery mouth
- 1" 1/2
- Pump body
- Cast iron
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 3
- Crankshaft
- AISI 304 stainless steel
- Check valve
- No
- Degree of protection
- IP 44
- Minimum flow rate (l./min.)
- 30
- Max. flow rate (l./min.)
- 250
- Min. head (m.)
- 26
- Max. head (m.)
- 93
- Jobs
- fire prevention systems
irrigation
pressurization systems
washing systems
water supply - Max. liquid temperature (°C)
- +90°C
- Motor voltage
- 230 V
400 V - Height (cm)
- 58.6
- Width (cm)
- 28
- Depth (cm)
- 25.7
- Weight (Kg)
- 48.5
- Warranty (years)
- 2
Construction data of the HT 5/6

Bearings
| Pump side motor bearing | 6307 2RS-C3 |
| Opposite side engine bearing | 6206 2RS-C3 |
Tree holding
| Type of seal | Single Mechanical Seal |
| Shrinkage DN1=450 DN2=350 | FN-18 |
| LP diameter | 18 |
| LP fixed ring | Graphite |
| LP rotating ring | Ceramic |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Cast iron GJL 250 EN 1561 |
| 2.0 - Lid | Cast iron GJL 250 EN 1561 |
| 3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 5.1 - Diffuser | Stainless steel EN 1.4301 (AISI 304) |
| 7.2 - Pump shirt | Stainless steel EN 1.4301 (AISI 304) |
