HTm 10/5 - 3 HP single-phase vertical multistage electric pump
The Pedrollo HTm 10/5 multi-impeller centrifugal electric pump is recommended for pumping clean water for domestic applications.
This electric pump is designed to guarantee high hydraulic performance combined with a robust, compact and reliable mechanical construction.
Recommended for pumping clean water and liquids that are not chemically aggressive towards the materials from which the pump is made.
The silence and great ductility make the HTm 10/5 ideal for applications in the domestic, civil and agricultural fields, in particular for the distribution of water in combination with pressure tanks, for increasing pressure in the network, for fire-fighting systems, for washing systems and for irrigation.
The flow rate ranges from 30 to 250 liters per minute. The head ranges from 21.5 to 77 meters.
The HTm 10/5 must be powered by a single-phase voltage, has a horsepower of 3 HP and the temperature of the liquid to be pumped ranges from -15 degrees centigrade up to +90.
The pump is made of AISI 431 stainless steel, including the 3 impellers, and cast iron which guarantee good robustness and guarantee excellent resistance.
With the multi-stage construction, the operating noise is particularly low.
The HTm 10/5 must be installed indoors or in any case protected from the elements.
- Motor connection
- SINGLE-PHASE
- Power (Kw)
- 2.2
- Power (HP)
- 3
- Absorption at 230V (A)
- 13.5
- Suction mouth
- 1" 1/2
- Delivery mouth
- 1" 1/2
- Pump body
- Cast iron
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 3
- Crankshaft
- AISI 304 stainless steel
- Check valve
- No
- Degree of protection
- IP 44
- Minimum flow rate (l./min.)
- 30
- Max. flow rate (l./min.)
- 250
- Min. head (m.)
- 21.5
- Max. head (m.)
- 77
- Jobs
- fire prevention systems
irrigation
pressurization systems
washing systems
water supply - Max. liquid temperature (°C)
- +90°C
- Motor voltage
- 230 V
- Height (cm)
- 56
- Width (cm)
- 28
- Depth (cm)
- 28
- Weight (Kg)
- 40.2
- Warranty (years)
- 2
Construction data of the HT 5/6

Bearings
| Pump side motor bearing | 6307 2RS-C3 |
| Opposite side engine bearing | 6206 2RS-C3 |
Tree holding
| Type of seal | Single Mechanical Seal |
| Shrinkage DN1=450 DN2=350 | FN-18 |
| LP diameter | 18 |
| LP fixed ring | Graphite |
| LP rotating ring | Ceramic |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Cast iron GJL 250 EN 1561 |
| 2.0 - Lid | Cast iron GJL 250 EN 1561 |
| 3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 5.1 - Diffuser | Stainless steel EN 1.4301 (AISI 304) |
| 7.2 - Pump shirt | Stainless steel EN 1.4301 (AISI 304) |



