-45%

HTm 10/4 - 2.5 HP single-phase vertical multistage electric pump

Flow rate up to 250 l/min (12 m³/h). Head up to 62 m. Motor 2 Kw (2.5 HP).

€801.85 Tax included

657.25 Tax excluded

€1,457.90-45%

Make a purchase proposal

Your Offer is sent.

Your Offer is accepted, please check your inbox.

HTm 10/4 - 2.5 HP single-phase vertical multistage electric pump
  • Use dot instead of comma

Loading

Description

The Pedrollo HTm 10/4 multi-impeller centrifugal electric pump is recommended for pumping clean water and liquids that are chemically non-aggressive for the materials from which the pump is made.

This electric pump is designed to guarantee high hydraulic performance combined with a robust, compact and reliable mechanical construction.

The high efficiency and adaptability to the most varied applications make the HTm 10/4 ideal for applications in the domestic, civil and agricultural fields, in particular for the distribution of water in combination with pressure tanks, for increasing pressure in the network, for fire-fighting systems, for washing systems and for irrigation.

The flow rate ranges from 30 to 250 liters per minute. The head ranges from 18 to 62 meters.

The HTm 10/4 must be powered by a single-phase voltage, has a horsepower of 2.5 HP and the temperature of the liquid to be pumped ranges from -15 degrees centigrade up to +90.

The pump is made of steel, including the 3 impellers, and cast iron which guarantee a long life and high performance of the pump.

With the multi-stage construction, the operating noise is particularly low.

The HTm 10/4 must be installed indoors or in any case protected from the elements.

Data sheet
Brand Pedrollo
Reference HTm 10/4
In stock 50 Items
MPN 48HT1104A1
Motor connection
SINGLE-PHASE
Power (Kw)
1.8
Power (HP)
2.5
Absorption at 230V (A)
11
Suction mouth
1" 1/2
Delivery mouth
1" 1/2
Pump body
Cast iron
Impeller
AISI 304 stainless steel
Number of impellers
3
Crankshaft
AISI 304 stainless steel
Check valve
No
Degree of protection
IP 44
Minimum flow rate (l./min.)
30
Max. flow rate (l./min.)
250
Min. head (m.)
18
Max. head (m.)
62
Jobs
fire prevention systems
irrigation
pressurization systems
washing systems
water supply
Max. liquid temperature (°C)
+90°C
Motor voltage
230 V
Height (cm)
53.4
Width (cm)
28
Depth (cm)
23.1
Weight (Kg)
36.7
Warranty (years)
2
Attachments

HT technical sheet

Construction and operating characteristics. Work curves, limits of use and dimensions of the Pedrollo HT series pumps.

Download (580.22KB)

Construction data of the HT 5/6

HT pump cutaway
Bearings
Pump side motor bearing6307 2RS-C3
Opposite side engine bearing6206 2RS-C3
Tree holding
Type of sealSingle Mechanical Seal
Shrinkage DN1=450 DN2=350FN-18
LP diameter18
LP fixed ringGraphite
LP rotating ringCeramic
LP elastomerNBR
Materials
1.0 - Pump bodyCast iron GJL 250 EN 1561
2.0 - LidCast iron GJL 250 EN 1561
3.0 - ImpellerStainless steel EN 1.4301 (AISI 304)
4.0 - Pump shaftStainless steel EN 1.4057 (AISI 431)
5.1 - DiffuserStainless steel EN 1.4301 (AISI 304)
7.2 - Pump shirtStainless steel EN 1.4301 (AISI 304)

Htm 10 models and performances