-45%

HTm 10/3 - 2 HP single-phase vertical multistage electric pump

Flow rate up to 250 l/min (12 m³/h). Head up to 47 m. Motor 1.5 Kw (2 HP).

€765.61 Tax included

627.55 Tax excluded

€1,392.02-45%

Make a purchase proposal

Your Offer is sent.

Your Offer is accepted, please check your inbox.

HTm 10/3 - 2 HP single-phase vertical multistage electric pump
  • Use dot instead of comma

Loading

Description

The HTm 10/3 multi-impeller centrifugal electric pump by Pedrollo is ideal for applications in the domestic, civil, agricultural and industrial fields.

Recommended for pumping clean water and liquids that are not chemically aggressive towards the materials from which the pump is made.

The HTm 10/3 electric pump is designed to guarantee high hydraulic performance combined with a robust, compact and reliable mechanical construction.

The high efficiency and adaptability to the most varied applications make it suitable for the distribution of water in combination with pressure tanks, for increasing pressure in the network, for fire-fighting systems, for washing systems and for irrigation.

The flow rate ranges from 30 to 250 liters per minute. The head ranges from 13 to 47 meters.

The HTm 10/3 must be powered by a single-phase voltage, has a horsepower of 2 HP and the temperature of the liquid to be pumped ranges from -15 degrees centigrade up to +90.

The pump is made of steel, including the 3 impellers, and cast iron which guarantee a long life and high performance of the pump.

With the multi-stage construction, the operating noise is particularly low.

The HTm 10/3 must be installed indoors or in any case protected from the elements.

Data sheet
Brand Pedrollo
Reference HTm 10/3
In stock 50 Items
MPN 48HT1103A1
Motor connection
SINGLE-PHASE
Power (Kw)
1.1
Power (HP)
1.5
Absorption at 230V (A)
9.5
Suction mouth
1" 1/2
Delivery mouth
1" 1/2
Pump body
Cast iron
Impeller
AISI 304 stainless steel
Number of impellers
3
Crankshaft
AISI 304 stainless steel
Check valve
No
Degree of protection
IP 44
Minimum flow rate (l./min.)
30
Max. flow rate (l./min.)
250
Min. head (m.)
13
Max. head (m.)
47
Jobs
fire prevention systems
irrigation
pressurization systems
washing systems
water supply
Max. liquid temperature (°C)
+90°C
Motor voltage
230 V
Height (cm)
48.8
Width (cm)
28
Depth (cm)
23.1
Weight (Kg)
34.7
Warranty (years)
2
Attachments

HT technical sheet

Construction and operating characteristics. Work curves, limits of use and dimensions of the Pedrollo HT series pumps.

Download (580.22KB)

Construction data of the HT 5/6

HT pump cutaway
Bearings
Pump side motor bearing6307 2RS-C3
Opposite side engine bearing6206 2RS-C3
Tree holding
Type of sealSingle Mechanical Seal
Shrinkage DN1=450 DN2=350FN-18
LP diameter18
LP fixed ringGraphite
LP rotating ringCeramic
LP elastomerNBR
Materials
1.0 - Pump bodyCast iron GJL 250 EN 1561
2.0 - LidCast iron GJL 250 EN 1561
3.0 - ImpellerStainless steel EN 1.4301 (AISI 304)
4.0 - Pump shaftStainless steel EN 1.4057 (AISI 431)
5.1 - DiffuserStainless steel EN 1.4301 (AISI 304)
7.2 - Pump shirtStainless steel EN 1.4301 (AISI 304)

Htm 10 models and performances