HFm 70B - 2 HP single-phase centrifugal electric pump
Description
The HFm 70B centrifugal electric pump from Pedrollo 's HF series is efficient and offers high performance in terms of head.
Pedrollo has made the pump with materials such as cast iron and 2 types of stainless steel, AISI 304 and 431, for a solid and resistant result.
Suitable for those who perform long work sessions. High flow rates are preferred, while the prevalence values are lacking.
The HFm 70B is recommended for use in agriculture and industry. It is suitable for surface and sprinkler irrigation, and for drawing water from lakes, rivers, and wells.
Data sheet
- Motor connection
- SINGLE-PHASE
- Power (Kw)
- 1.5
- Power (HP)
- 2
- Absorption at 230V (A)
- 10
- Capacitor
- 45 µF 450 VL
- Suction mouth
- 1" 1/2
- Delivery mouth
- 1" 1/2
- Pump body
- Cast iron
- Impeller
- Brass
- Number of impellers
- 1
- Crankshaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- No
- Degree of protection
- IP 44
- Minimum flow rate (l./min.)
- 50
- Max. flow rate (l./min.)
- 300
- Min. head (m.)
- 19
- Max. head (m.)
- 33
- Jobs
- cooling systems
irrigation
tank transfer
water supply - Max. liquid temperature (°C)
- +90°C
- Motor voltage
- 230 V
- Height (cm)
- 26.9
- Width (cm)
- 37.3
- Depth (cm)
- 21.6
- Weight (Kg)
- 21.4
- Warranty (years)
- 2
HFm models and performances - Medium ranges
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the HF 70C-70B-70A-5 BM-5 AM

Bearings
| Pump side motor bearing | 6204 ZZ |
| Opposite side motor bearing | 6204 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | FN-18 |
| LP diameter | 18 |
| Fixed ring LP | Graphite |
| Rotating ring LP | Ceramic |
| LP elastomer | NBR |
Mat
| 1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
| 2.1 - Seal holder cover | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Brass CW617N EN 12165 |
| 4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |



