HFm 51B - 0.75 HP single-phase centrifugal electric pump
Flow rate up to 300 l/min (18 m³/h). Head up to 18.2 m. 0.55 Kw (0.75 HP) motor.
The HFm 51B centrifugal electric pump from the HF series by Pedrollo belongs to the medium flow rate category.
It satisfies the needs of those who require high flow rates and are not interested in having large values in terms of head.
The HFm 51B is recommended for surface and sprinkler irrigation, for drawing water from lakes, rivers and wells.
Advantageous as it is reliable and constant even during long watering sessions.
The flow rate ranges from 50 to 300 litres per minute while the head ranges from 5.4 to 18.2 metres.
- Motor connection
- SINGLE-PHASE
- Power (HP)
- 0.75
- Absorption at 230V (A)
- 4.7
- Capacitor
- 20 µF 450 VL
- Suction mouth
- 1" 1/2
- Delivery mouth
- 1" 1/2
- Pump body
- Cast iron
- Impeller
- Brass
- Number of impellers
- 1
- Crankshaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- No
- Degree of protection
- IP 44
- Minimum flow rate (l./min.)
- 50
- Max. flow rate (l./min.)
- 300
- Min. head (m.)
- 5.4
- Max. head (m.)
- 18.2
- Jobs
- cooling systems
irrigation
tank transfer
water supply - Max. liquid temperature (°C)
- +90°C
- Motor voltage
- 230 V
- Height (cm)
- 22.5
- Width (cm)
- 30.3
- Depth (cm)
- 19
- Weight (Kg)
- 12.9
- Warranty (years)
- 2
HFm models and performances - Medium ranges
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the HF 51B-51A-5B-5A

Bearings
| Pump side motor bearing | 6203 ZZ |
| Opposite side motor bearing | 6203 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | AR-14 |
| LP diameter | 14 |
| Fixed ring LP | Ceramic |
| Rotating ring LP | Graphite |
| LP elastomer | NBR |
Mat
| 1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
| 2.1 - Seal holder cover | EN 1.4301 stainless steel (AISI 304) |
| 3.0 - Impeller | Brass CW617N EN 12165 |
| 4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |
