HF 30B - 7.5 HP three-phase centrifugal electric pump
Flow rate up to 2400 l/min (144 m³/h). Head up to 18 m. 5.5 kW (7.5 HP) motor.
The Pedrollo HF 30B centrifugal electric pump is recommended for use in the agricultural and industrial fields.
Suitable for surface and sprinkler irrigation, for drawing water from lakes, rivers and wells.
It satisfies the needs of those who require a high flow rate at the expense of a low head.
The flow rate ranges from 600 to 2400 litres per minute while the head ranges from 10 to 18 metres.
Made from the highest quality AISI 304 and 431 stainless steel and cast iron, the HF 30B boasts a solid and robust construction built to last over time.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 5.5
- Power (HP)
- 7.5
- Absorption at 230V (A)
- 21.3
- Current consumption at 400V (A)
- 12.3
- Minimum flow rate (l./min.)
- 600
- Max. flow rate (l./min.)
- 2400
- Min. head (m.)
- 10
- Max. head (m.)
- 18
- Max. liquid temperature (°C)
- +90°C
- Height (cm)
- 37
- Width (cm)
- 49.7
- Depth (cm)
- 29.2
- Weight (Kg)
- 46.8
HF models and performances - High flow rates
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the HF 30B-30A

Bearings
| Pump side motor bearing | 6307 ZZ - C3 |
| Opposite side motor bearing | 6206 ZZ - C3 |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | FN-24 |
| LP diameter | 24 |
| Fixed ring LP | Graphite |
| Rotating ring LP | Ceramic |
| LP elastomer | NBR |
Mat
| 1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
| 2.1 - Seal holder cover | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Cast iron GJL 200 EN 1561 |
| 4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |



