HF 8B - 4 HP three-phase centrifugal electric pump
Flow rate up to 1200 l/min (72 m³/h). Head up to 21.5 m. 3 kW (4 HP) motor.
The high-flow centrifugal electric pump HF 8B from the HF series by Pedrollo is recommended for use in the agricultural and industrial sectors, particularly for surface and sprinkler irrigation, and for drawing water from lakes, rivers and wells.
Suitable for use in the agricultural and industrial sectors.
The HF 8B boasts great reliability during long work sessions and is more suitable for those who need high flow rates and low head values.
Pedrollo 's use of materials such as cast iron and stainless steel makes the pump solid, robust and built to last over time.
The flow rate ranges from 200 to 1200 litres per minute while the head ranges from 9 to 21.5 metres.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 3
- Power (HP)
- 4
- Absorption at 230V (A)
- 12.1
- Current consumption at 400V (A)
- 7
- Suction mouth
- 4"
- Delivery mouth
- 4"
- Pump body
- Cast iron
- Impeller
- Brass
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Degree of protection
- IP 44
- Minimum flow rate (l./min.)
- 200
- Max. flow rate (l./min.)
- 1200
- Min. head (m.)
- 9
- Max. head (m.)
- 21.5
- Jobs
- cooling systems
irrigation
tank transfer
water supply - Max. liquid temperature (°C)
- +90°C
- Motor voltage
- 400 V
- Height (cm)
- 31.2
- Width (cm)
- 44.5
- Depth (cm)
- 24.5
- Weight (Kg)
- 35.6
- Warranty (years)
- 2
HF models and performances - High flow rates
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the HF 8B-20B

Bearings
| Pump side motor bearing | 6206 ZZ - C3 |
| Opposite side motor bearing | 6205 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | FN-20 |
| LP diameter | 20 |
| Fixed ring LP | Graphite |
| Rotating ring LP | Ceramic |
| LP elastomer | NBR |
Mat
| 1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
| 2.1 - Seal holder cover | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Brass CW617N EN 12165 |
| 4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |



