HFm 6B - 2 HP single-phase centrifugal electric pump
Flow rate up to 1100 l/min (66 m³/h). Head up to 14.8 m. 1.5 Kw (2 HP) motor.
The Pedrollo HFm 6B centrifugal electric pump is suitable for those who require high flow rates at the expense of head.
Recommended for use in the agricultural and industrial sectors, particularly for surface and sprinkler irrigation, and for drawing water from lakes, rivers and wells.
Advantageous as it is reliable and constant even during long watering sessions.
Pedrollo has created a solid and robust product: the HFm 6B is made from materials such as cast iron and AISI 304 and 431 stainless steel.
The flow rate ranges from 200 to 1100 litres per minute while the head ranges from 5 to 14.8 metres.
- Motor connection
- SINGLE-PHASE
- Power (Kw)
- 1.5
- Power (HP)
- 2
- Absorption at 230V (A)
- 10.4
- Capacitor
- 45 µF 450 VL
- Suction mouth
- 3"
- Delivery mouth
- 3"
- Pump body
- Cast iron
- Impeller
- Brass
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Degree of protection
- IP 44
- Minimum flow rate (l./min.)
- 200
- Max. flow rate (l./min.)
- 1100
- Min. head (m.)
- 5
- Max. head (m.)
- 14.8
- Jobs
- cooling systems
irrigation
tank transfer
water supply - Max. liquid temperature (°C)
- +90°C
- Motor voltage
- 230 V
- Height (cm)
- 31.2
- Width (cm)
- 41.1
- Depth (cm)
- 24
- Weight (Kg)
- 26.8
- Warranty (years)
- 2
HF models and performances - High flow rates
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the HF 6C-6B-6A

Bearings
| Pump side motor bearing | 6304 ZZ |
| Opposite side motor bearing | 6204 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | FN-18 |
| LP diameter | 18 |
| Fixed ring LP | Graphite |
| Rotating ring LP | Ceramic |
| LP elastomer | NBR |
Mat
| 1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
| 2.1 - Seal holder cover | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Brass CW617N EN 12165 |
| 4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |



