FUTURE JETm 2A-ST - 1.25 HP single-phase self-priming electric pump
Flow rate up to 120 l/min (7.2 m³/h). Head up to 58 m. 1.1 kW (1.25 HP) motor.
The FUTURE JETm 2A-ST self-priming electric pump is recommended for pumping clean water and liquids that are chemically non-aggressive towards the pump's constituent materials. It is designed to draw water even when air is mixed with the pumped liquid.
It has a flow rate that varies from 5 to 120 litres per minute with a head from 13 to 58 metres.
With an internationally registered patent, the FUTURE JET series electric pumps are able to obtain the same pressure as a classic JET but double the flow rate, achieving a reduction in energy consumption of up to 50%.
Due to its reliability and ease of use, it is recommended for domestic use, especially for water distribution in conjunction with small or medium-sized pressure tanks, for irrigation of vegetable gardens and gardens.
Installation must be carried out in well-ventilated, closed areas or in any case protected from the elements.
- Motor connection
- SINGLE-PHASE
- Power (Kw)
- 0.90
- Power (HP)
- 1.25
- Absorption at 230V (A)
- 6.6
- Capacitor
- 25 µF 450 VL
- Suction mouth
- 1"
- Delivery mouth
- 1"
- Pump body
- AISI 304 stainless steel
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Degree of protection
- IP 44
- Minimum flow rate (l./min.)
- 5
- Max. flow rate (l./min.)
- 120
- Min. head (m.)
- 13
- Max. head (m.)
- 58
- Jobs
- irrigation
pressurization systems
water supply - Max. liquid temperature (°C)
- +40°C
- Height (cm)
- 18.3
- Width (cm)
- 18.2
- Depth (cm)
- 36.7
- Weight (Kg)
- 11.8
- Warranty (years)
- 2
FUTURE JETm-ST models and performances
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the FUTURE JET 2ST

Bearings
| Pump side motor bearing | 6203ZZ |
| Opposite side engine bearing | 6203ZZ |
Shaft seal
| Seal type | Single Mechanical Seal |
| Pump side model | AR-14 |
| LP diameter | 14 |
| LP fixed ring | Ceramic |
| Rotating ring LP | Graphite |
| LP elastomer | NBR |
Materials
| 1.0 - Pump Body | Stainless steel EN 1.4301 (AISI 304) |
| 2.1 - Seal holder cover | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
| 3.1 - Ejector Group | Reinforced technopolymer |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Motor carrier | EN-AB 46100 aluminium |
| 7.0 - Lantern | EN-AB 46100 aluminium |



