F 80/160C - 20 HP three-phase standard centrifugal electric pump
Flow rate up to 4000 l/min (240 m³/h). Head up to 30 m. 15 kW (20 HP) motor.
Description
The F 80/160C standardized centrifugal electric pump from the F series by Pedrollo is recommended for civil and industrial installations.
It stands out for its flexibility which makes it suitable for the most varied uses.
Suitable for water supply, pressurization and irrigation.
It can pump clean water without abrasive parts and chemically non-aggressive liquids the materials from which the pump is made.
The F 80/160C is the best choice in the category of standard centrifuges.
Data sheet
- Motor connection
- THREE-PHASE
- Power (Kw)
- 15
- Power (HP)
- 20
- Current consumption at 400V (A)
- 29
- Suction mouth
- 4"
- Delivery mouth
- 3"
- Pump body
- Cast iron
- Impeller
- Cast iron
- Number of impellers
- 1
- Crankshaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- No
- Degree of protection
- IP 55
- Minimum flow rate (l./min.)
- 500
- Max. flow rate (l./min.)
- 4000
- Min. head (m.)
- 15
- Max. head (m.)
- 30
- Jobs
- air conditioning systems
cooling systems
fire prevention systems
irrigation
pressurization systems
washing systems
water supply - Max. liquid temperature (°C)
- +90°C
- Height (cm)
- 40.5
- Width (cm)
- 74.7
- Weight (Kg)
- 120
- Warranty (years)
- 2
Models and performances F 80/160
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the F 50/200A-AR-65-80/160-200

Bearings
| Pump side motor bearing | 6310 ZZ-C3 |
| Opposite side engine bearing | 6308 ZZ-C3 |
Tree holding
| Type of seal | Single Mechanical Seal |
| Shrinkage DN1=450 DN2=350 | FN-32 NU |
| LP diameter | 32 |
| LP fixed ring | Graphite |
| LP rotating ring | Ceramic |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Cast iron GJL 200 EN 1561 |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Motor holder | EN-AB 46100 aluminium |
| 6.1 - Engine cover | EN-AB 46100 aluminium |
| 7.0 - Lantern | Cast iron GJL 200 EN 1561 |



