F 65/250B - 50 HP three-phase standard centrifugal electric pump
Flow rate up to 2500 l/min (150 m³/h). Head up to 87 m. 37 kW (50 HP) motor.
The standardized centrifugal electric pump F 65/250B of the F series by Pedrollo boasts flange construction in accordance with the EN 733 standard.
It can pump clean water without abrasive parts and chemically non-aggressive liquids for the components.
Reliable and flexible, it boasts a wide range of applications and circumstances in which it is among the best on the market.
The F 65/250B is recommended for installations in washing, fire-fighting, industrial and agricultural systems.
Pedrollo created the electric pump with a mix of cast iron, brass, and stainless steel for a solid, robust, and long-lasting result.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 37
- Power (HP)
- 50
- Current consumption at 400V (A)
- 65
- Suction mouth
- 3"
- Delivery mouth
- 2" 1/2
- Pump body
- Cast iron
- Impeller
- Cast iron
- Number of impellers
- 1
- Crankshaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- No
- Degree of protection
- IP 55
- Minimum flow rate (l./min.)
- 400
- Max. flow rate (l./min.)
- 2500
- Min. head (m.)
- 62
- Max. head (m.)
- 87
- Max. liquid temperature (°C)
- +90°C
- Height (cm)
- 45.1
- Width (cm)
- 84.7
- Weight (Kg)
- 226
- Warranty (years)
- 2
Models and performances F 65/250
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the F 65/250-80/200-80/250

Bearings
| Pump side motor bearing | 6312 ZZ-C3 |
| Opposite side engine bearing | 6212 ZZ-C3 |
Tree holding
| Type of seal | Single Mechanical Seal |
| Shrinkage DN1=450 DN2=350 | FN-40 NU |
| LP diameter | 40 |
| LP fixed ring | Graphite |
| LP rotating ring | Ceramic |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Cast iron GJL 200 EN 1561 |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Motor holder | EN-AB 46100 aluminium |
| 6.1 - Engine cover | EN-AB 46100 aluminium |
| 7.0 - Lantern | Cast iron GJL 200 EN 1561 |



