F 65/160C - 12.5 HP three-phase standard centrifugal electric pump
Flow rate up to 2200 l/min (132 m³/h). Head up to 32 m. 9.2 Kw (12.5 HP) motor.
The F 65/160C standardized centrifugal electric pump from Pedrollo 's F series is among the best choices when it comes to standardized electric pumps.
The F 65/160C stands out for its flexibility, efficiency and construction solidity.
Suitable for water supply, pressurization, irrigation and water circulation in air conditioning systems.
It guarantees efficient performance even after long and stressful work sessions.
Pedrollo 's use of cast iron, brass, and stainless steel in the construction of the Fm 65/160C makes it solid, robust, and resistant to stress and wear.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 9.2
- Power (HP)
- 12.5
- Current consumption at 400V (A)
- 19.0
- Suction mouth
- 3"
- Delivery mouth
- 2" 1/2
- Pump body
- Cast iron
- Impeller
- Cast iron
- Number of impellers
- 1
- Crankshaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- No
- Degree of protection
- IP 55
- Minimum flow rate (l./min.)
- 600
- Max. flow rate (l./min.)
- 2200
- Min. head (m.)
- 22
- Max. head (m.)
- 32
- Jobs
- air conditioning systems
cooling systems
fire prevention systems
irrigation
pressurization systems
washing systems
water supply - Max. liquid temperature (°C)
- +90°C
- Height (cm)
- 36
- Width (cm)
- 62
- Weight (Kg)
- 98.5
- Warranty (years)
- 2
Models and performances F 65/160
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the F 50/200A-AR-65-80/160-200

Bearings
| Pump side motor bearing | 6310 ZZ-C3 |
| Opposite side engine bearing | 6308 ZZ-C3 |
Tree holding
| Type of seal | Single Mechanical Seal |
| Shrinkage DN1=450 DN2=350 | FN-32 NU |
| LP diameter | 32 |
| LP fixed ring | Graphite |
| LP rotating ring | Ceramic |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Cast iron GJL 200 EN 1561 |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Motor holder | EN-AB 46100 aluminium |
| 6.1 - Engine cover | EN-AB 46100 aluminium |
| 7.0 - Lantern | Cast iron GJL 200 EN 1561 |



