-45%

F 65/125B - 7.5 HP three-phase standard centrifugal electric pump

Flow rate up to 2000 l/min (120 m³/h). Head up to 18 m. 5.5 kW (7.5 HP) motor.

€855.53 Tax included

701.25 Tax excluded

€1,555.50-45%

Make a purchase proposal

Your Offer is sent.

Your Offer is accepted, please check your inbox.

F 65/125B - 7.5 HP three-phase standard centrifugal electric pump
  • Use dot instead of comma

Loading

Description

The F 65/125B standardized centrifugal electric pump from the F series by Pedrollo is a reliable and robust monoblock electric pump.

Pedrollo has created this electric pump in compliance with EN733 standards.

Replacing flanges and motors has never been easier thanks to compliance with this standardization.

Pedrollo 's use of cast iron, brass and stainless steel in the construction of the Fm 65/125B makes it solid, robust and resistant to stress and wear.

Installation must be carried out in well-ventilated, closed areas or in any case protected from the elements.

Data sheet
Brand Pedrollo
Reference F 65/125B
In stock 9 Items
MPN 4FN65125BE
Motor connection
THREE-PHASE
Power (Kw)
5.5
Power (HP)
7.5
Current consumption at 400V (A)
12.0
Suction mouth
3"
Delivery mouth
2" 1/2
Pump body
Cast iron
Impeller
Cast iron
Number of impellers
1
Crankshaft
Stainless steel EN 10088-3 1.4104
Check valve
No
Degree of protection
IP 55
Minimum flow rate (l./min.)
600
Max. flow rate (l./min.)
2000
Min. head (m.)
13
Max. head (m.)
18
Jobs
air conditioning systems
cooling systems
fire prevention systems
irrigation
pressurization systems
washing systems
water supply
Max. liquid temperature (°C)
+90°C
Height (cm)
34
Width (cm)
55.7
Weight (Kg)
58.3
Warranty (years)
2
Attachments

Technical sheet F

Models, performance curves and construction features of the Pedrollo F series pumps.

Download (820.58KB)

Models and performances F 65/125

GUY
Three-phase
F 65/125C
F 65/125B
F 65/125A
POWER
KWHP
45.5
5.57.5
7.510

Construction data of the F 32-40/200-50/160-65/125

F pump cutaway
Bearings
Pump side motor bearing6307 ZZ-C3
Opposite side engine bearing6206 ZZ-C3
Tree holding
Type of sealSingle Mechanical Seal
Shrinkage DN1=450 DN2=350FN-24
LP diameter24
LP fixed ringGraphite
LP rotating ringCeramic
LP elastomerNBR
Materials
1.0 - Pump bodyCast iron GJL 200 EN 1561
2.1 - Seal holder coverCast iron GJL 200 EN 1561
3.0 - ImpellerBrass CW617N EN 12165
4.0 - Pump shaftStainless steel EN 1.4057 (AISI 431)
6.0 - Motor holderEN-AB 46100 aluminium
6.1 - Engine coverEN-AB 46100 aluminium
7.0 - LanternEN-AB 46100 aluminium