F 50/250D - 12.5 HP three-phase standard centrifugal electric pump
Flow rate up to 900 l/min (54 m³/h). Head up to 51 m. 9.2 kW (12.5 HP) motor.
Description
The F 50/250D standardized centrifugal electric pump from Pedrollo 's F series stands out for the flexibility of the activities it allows it to perform.
Adaptable to a wide range of installations and uses.
Recommended for installations in the domestic, civil and agricultural sectors.
Suitable for activities such as water supply, pressurization, irrigation, washing systems and fire-fighting.
Installation must be carried out in well-ventilated, closed areas or in any case protected from the elements.
Data sheet
- Motor connection
- THREE-PHASE
- Power (Kw)
- 9.2
- Power (HP)
- 12.5
- Current consumption at 400V (A)
- 19
- Suction mouth
- 2" 1/2
- Delivery mouth
- 2"
- Pump body
- Cast iron
- Impeller
- Cast iron
- Number of impellers
- 1
- Crankshaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- No
- Degree of protection
- IP 55
- Minimum flow rate (l./min.)
- 300
- Max. flow rate (l./min.)
- 900
- Min. head (m.)
- 37
- Max. head (m.)
- 51
- Jobs
- air conditioning systems
cooling systems
fire prevention systems
irrigation
pressurization systems
washing systems
water supply - Max. liquid temperature (°C)
- +90°C
- Height (cm)
- 40.5
- Width (cm)
- 60.5
- Weight (Kg)
- 104.2
- Warranty (years)
- 2
Models and performances F 50/250
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the F32/250-40-50/250-50/200

Bearings
| Pump side motor bearing | 6310 ZZ-C3 |
| Opposite side engine bearing | 6308 ZZ-C3 |
Tree holding
| Type of seal | Single Mechanical Seal |
| Shrinkage DN1=450 DN2=350 | FN-38 |
| LP diameter | 38 |
| LP fixed ring | Graphite |
| LP rotating ring | Ceramic |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Cast iron GJL 200 EN 1561 |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Motor holder | EN-AB 46100 aluminium |
| 6.1 - Engine cover | EN-AB 46100 aluminium |
| 7.0 - Lantern | Cast iron GJL 200 EN 1561 |



