F 50/200A - 25 HP three-phase standard centrifugal electric pump
Flow rate up to 1800 l/min (108 m³/h). Head up to 61 m. 18.5 kW (25 HP) motor.
The standardized centrifugal electric pump F 50/200A of the F series by Pedrollo boasts flange construction in accordance with the EN 733 standard.
It can pump clean water without abrasive parts and chemically non-aggressive liquids for the components.
Reliable and flexible, it boasts a wide range of applications and circumstances in which it is among the best on the market.
The F 50/200A is recommended for installations in washing, fire-fighting, industrial and agricultural systems.
Pedrollo created the electric pump with a mix of cast iron, brass, and stainless steel for a solid, robust, and long-lasting result.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 18.5
- Power (HP)
- 25
- Current consumption at 400V (A)
- 34.5
- Suction mouth
- 2" 1/2
- Delivery mouth
- 2"
- Pump body
- Cast iron
- Impeller
- Cast iron
- Number of impellers
- 1
- Crankshaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- No
- Degree of protection
- IP 55
- Minimum flow rate (l./min.)
- 400
- Max. flow rate (l./min.)
- 1800
- Min. head (m.)
- 45
- Max. head (m.)
- 61
- Jobs
- air conditioning systems
cooling systems
fire prevention systems
irrigation
pressurization systems
washing systems
water supply - Max. liquid temperature (°C)
- +90°C
- Height (cm)
- 36
- Width (cm)
- 71.1
- Weight (Kg)
- 127.2
- Warranty (years)
- 2
Models and performances F 50/200
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the F 50/200A-AR-65-80/160-200

Bearings
| Pump side motor bearing | 6310 ZZ-C3 |
| Opposite side engine bearing | 6308 ZZ-C3 |
Tree holding
| Type of seal | Single Mechanical Seal |
| Shrinkage DN1=450 DN2=350 | FN-32 NU |
| LP diameter | 32 |
| LP fixed ring | Graphite |
| LP rotating ring | Ceramic |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Cast iron GJL 200 EN 1561 |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Motor holder | EN-AB 46100 aluminium |
| 6.1 - Engine cover | EN-AB 46100 aluminium |
| 7.0 - Lantern | Cast iron GJL 200 EN 1561 |



