F 50/125A - 5.5 HP three-phase standard centrifugal electric pump
Flow rate up to 1200 l/min (72 m³/h). Head up to 24.5 m. 4 kW (5.5 HP) motor.
The F 50/125A standardized centrifugal electric pump from the F series by Pedrollo is a reliable and robust monoblock electric pump.
Pedrollo has created this electric pump in compliance with EN733 standards.
Replacing flanges and motors has never been easier thanks to compliance with this standardization.
Pedrollo 's use of cast iron, brass, and stainless steel in the construction of the Fm 50/125A makes it solid, robust, and resistant to stress and wear.
Installation must be carried out in well-ventilated, closed spaces or in any case protected from the elements.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 4
- Power (HP)
- 5.5
- Absorption at 230V (A)
- 16.3
- Current consumption at 400V (A)
- 9.4
- Suction mouth
- 2" 1/2
- Delivery mouth
- 2"
- Pump body
- Cast iron
- Impeller
- Brass
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Degree of protection
- IP 55
- Minimum flow rate (l./min.)
- 100
- Max. flow rate (l./min.)
- 1200
- Min. head (m.)
- 13
- Max. head (m.)
- 24.5
- Jobs
- air conditioning systems
cooling systems
fire prevention systems
irrigation
pressurization systems
washing systems
water supply - Max. liquid temperature (°C)
- +90°C
- Height (cm)
- 29.2
- Width (cm)
- 48.4
- Depth (cm)
- 24.2
- Weight (Kg)
- 42.8
- Warranty (years)
- 2
Models and performances F 50/125
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the F 50/125A

Bearings
| Pump side motor bearing | 6206 ZZ-C3 |
| Opposite side engine bearing | 6206 ZZ-C3 |
Tree holding
| Type of seal | Single Mechanical Seal |
| Shrinkage DN1=450 DN2=350 | FN-20 |
| LP diameter | 20 |
| LP fixed ring | Graphite |
| LP rotating ring | Ceramic |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Cast iron GJL 200 EN 1561 |
| 2.1 - Seal holder cover | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Brass CW617N EN 12165 |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Motor holder | EN-AB 46100 aluminium |
| 6.1 - Engine cover | EN-AB 46100 aluminium |
| 7.0 - Lantern | EN-AB 46100 aluminium |



