F 50/125B - 4 HP three-phase standard centrifugal electric pump
Flow rate up to 1200 l/min (72 m³/h). Head up to 21.5 m. 3 kW (4 HP) motor.
Description
The F 50/125B standardized centrifugal electric pump from the F series by Pedrollo is a reliable and robust monoblock electric pump.
Recommended for civil, industrial and agricultural installations.
Suitable for activities such as water supply, pressurization, irrigation and water circulation in air conditioning systems.
Installation must be carried out in well-ventilated, closed areas or in any case protected from the elements.
The F 50/125B electric pump is among the best in the category of standardized monoblock pumps.
Data sheet
- Motor connection
- THREE-PHASE
- Power (Kw)
- 3
- Power (HP)
- 4
- Absorption at 230V (A)
- 12.0
- Current consumption at 400V (A)
- 6.9
- Suction mouth
- 2" 1/2
- Delivery mouth
- 2"
- Pump body
- Cast iron
- Impeller
- Brass
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Degree of protection
- IP 55
- Minimum flow rate (l./min.)
- 100
- Max. flow rate (l./min.)
- 1200
- Min. head (m.)
- 9
- Max. head (m.)
- 21.5
- Jobs
- air conditioning systems
cooling systems
fire prevention systems
irrigation
pressurization systems
washing systems
water supply - Max. liquid temperature (°C)
- +90°C
- Height (cm)
- 29.2
- Width (cm)
- 46.5
- Depth (cm)
- 24.2
- Weight (Kg)
- 38.5
- Warranty (years)
- 2
Models and performances F 50/125
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the F 32/160A-50/125

Bearings
| Pump side motor bearing | 6206 ZZ-C3 |
| Opposite side engine bearing | 6205 ZZ |
Tree holding
| Type of seal | Single Mechanical Seal |
| Shrinkage DN1=450 DN2=350 | FN-20 |
| LP diameter | 20 |
| LP fixed ring | Graphite |
| LP rotating ring | Ceramic |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Cast iron GJL 200 EN 1561 |
| 2.1 - Seal holder cover | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Brass CW617N EN 12165 |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Motor holder | EN-AB 46100 aluminium |
| 6.1 - Engine cover | EN-AB 46100 aluminium |
| 7.0 - Lantern | EN-AB 46100 aluminium |
