F 50/125C - 3 HP three-phase standard centrifugal electric pump
Flow rate up to 1200 l/min (72 m³/h). Head up to 18.5 m. 2.2 Kw (3 HP) motor.
The F 50/125C standardized centrifugal electric pump from the Pedrollo F series is recommended for civil and industrial installations.
It can pump clean water without abrasive parts and chemically non-aggressive liquids for the components.
Suitable for water supply, pressurization, irrigation, and water circulation in air conditioning systems. It is also effective in washing and fire-fighting systems.
The crankshaft is made of AISI 431 stainless steel, the pump body and impeller are made of cast iron and brass.
The F 50/125C is a reliable, efficient and robust monoblock.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 2.2
- Power (HP)
- 3
- Absorption at 230V (A)
- 9.4
- Current consumption at 400V (A)
- 5.4
- Suction mouth
- 2" 1/2
- Delivery mouth
- 2"
- Pump body
- Cast iron
- Impeller
- Brass
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Degree of protection
- IP 55
- Minimum flow rate (l./min.)
- 100
- Max. flow rate (l./min.)
- 1200
- Min. head (m.)
- 6
- Max. head (m.)
- 18.5
- Jobs
- air conditioning systems
cooling systems
fire prevention systems
irrigation
pressurization systems
washing systems
water supply - Max. liquid temperature (°C)
- +90°C
- Height (cm)
- 29.2
- Width (cm)
- 45.1
- Depth (cm)
- 24.2
- Weight (Kg)
- 35.1
- Warranty (years)
- 2
Models and performances F 50/125
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the F 32/160A-50/125

Bearings
| Pump side motor bearing | 6206 ZZ-C3 |
| Opposite side engine bearing | 6205 ZZ |
Tree holding
| Type of seal | Single Mechanical Seal |
| Shrinkage DN1=450 DN2=350 | FN-20 |
| LP diameter | 20 |
| LP fixed ring | Graphite |
| LP rotating ring | Ceramic |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Cast iron GJL 200 EN 1561 |
| 2.1 - Seal holder cover | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Brass CW617N EN 12165 |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Motor holder | EN-AB 46100 aluminium |
| 6.1 - Engine cover | EN-AB 46100 aluminium |
| 7.0 - Lantern | EN-AB 46100 aluminium |
