Fm 40/125B - 2 HP single-phase standard centrifugal electric pump
Flow rate up to 600 l/min (36 m³/h). Head up to 20.5 m. 1.5 kW (2 HP) motor.
The Fm 40/125B standardized centrifugal electric pump from the Pedrollo F series is among the best choices when it comes to standardized electric pumps.
The Fm 40/125B stands out for its flexibility, efficiency and construction solidity.
Suitable for water supply, pressurization, irrigation and water circulation in air conditioning systems.
It guarantees efficient performance even after long and stressful work sessions.
Pedrollo 's use of cast iron, brass, and stainless steel in the construction of the Fm 32/250A makes it solid, robust, and resistant to stress and wear.
- Motor connection
- SINGLE-PHASE
- Power (Kw)
- 1.5
- Power (HP)
- 2
- Absorption at 230V (A)
- 15
- Capacitor
- 45 µF 450 VL
- Suction mouth
- 2" 1/2
- Delivery mouth
- 1" 1/2
- Pump body
- Cast iron
- Impeller
- Brass
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Degree of protection
- IP 55
- Minimum flow rate (l./min.)
- 100
- Max. flow rate (l./min.)
- 600
- Min. head (m.)
- 9
- Max. head (m.)
- 20.5
- Jobs
- air conditioning systems
cooling systems
fire prevention systems
irrigation
pressurization systems
washing systems
water supply - Max. liquid temperature (°C)
- +90°C
- Height (cm)
- 25.2
- Width (cm)
- 42.1
- Depth (cm)
- 21
- Weight (Kg)
- 33
- Warranty (years)
- 2
Fm 40/125 models and performances
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the F32/160B-F 40/125-160C

Bearings
| Pump side motor bearing | 6206 ZZ-C3 |
| Opposite side engine bearing | 6204 ZZ |
Tree holding
| Type of seal | Single Mechanical Seal |
| Shrinkage DN1=450 DN2=350 | FN-20 |
| LP diameter | 20 |
| LP fixed ring | Graphite |
| LP rotating ring | Ceramic |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Cast iron GJL 200 EN 1561 |
| 2.1 - Seal holder cover | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Brass CW617N EN 12165 |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Motor holder | EN-AB 46100 aluminium |
| 6.1 - Engine cover | EN-AB 46100 aluminium |
| 7.0 - Lantern | EN-AB 46100 aluminium |



