F 40/125C - 1.5 HP three-phase standard centrifugal electric pump
Flow rate up to 550 l/min (33 m³/h). Head up to 16 m. 1.1 kW (1.5 HP) motor.
The standardized centrifugal electric pump F 40/125C of the F series by Pedrollo can pump clean water and chemically non-aggressive liquids for the components.
Recommended for use in the civil and industrial sectors.
Suitable for a wide variety of uses such as water supply, pressurization, irrigation and water circulation in air conditioning systems.
The F 40/125C stands out not only for its flexibility but also for its compliance with EN733 standards.
Replacing the flanges and motor is quick and easy thanks to the construction according to the EN733 standard.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 1.1
- Power (HP)
- 1.5
- Absorption at 230V (A)
- 5.7
- Current consumption at 400V (A)
- 3.3
- Suction mouth
- 2" 1/2
- Delivery mouth
- 1" 1/2
- Pump body
- Cast iron
- Impeller
- Brass
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Degree of protection
- IP 55
- Minimum flow rate (l./min.)
- 100
- Max. flow rate (l./min.)
- 550
- Min. head (m.)
- 6
- Max. head (m.)
- 16
- Jobs
- air conditioning systems
cooling systems
fire prevention systems
irrigation
pressurization systems
washing systems
water supply - Max. liquid temperature (°C)
- +90°C
- Height (cm)
- 25.2
- Width (cm)
- 42.1
- Depth (cm)
- 24.4
- Weight (Kg)
- 29.9
- Warranty (years)
- 2
Models and performances F 40/125
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the F32/160B-F 40/125-160C

Bearings
| Pump side motor bearing | 6206 ZZ-C3 |
| Opposite side engine bearing | 6204 ZZ |
Tree holding
| Type of seal | Single Mechanical Seal |
| Shrinkage DN1=450 DN2=350 | FN-20 |
| LP diameter | 20 |
| LP fixed ring | Graphite |
| LP rotating ring | Ceramic |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Cast iron GJL 200 EN 1561 |
| 2.1 - Seal holder cover | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Brass CW617N EN 12165 |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Motor holder | EN-AB 46100 aluminium |
| 6.1 - Engine cover | EN-AB 46100 aluminium |
| 7.0 - Lantern | EN-AB 46100 aluminium |
