F 32/200AH - 5.5 HP three-phase standard centrifugal electric pump
Flow rate up to 320 l/min (19.2 m³/h). Head up to 57 m. 4 kW (5.5 HP) motor.
The standardized centrifugal electric pump F 32/200AH of the F series by Pedrollo is built in compliance with EN733 standards.
Compliance with the standard makes it easy to replace flanges and the motor.
It can pump clean water and liquids that are not chemically aggressive towards the materials from which the pump is made.
The F 32/200AH is flexible and suitable for a wide variety of uses. It is recommended for tasks such as pressurization, irrigation, and water circulation in air conditioning systems.
Solid and robust, it resists stress and wear thanks to Pedrollo 's use of cast iron and brass.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 4
- Power (HP)
- 5.5
- Absorption at 230V (A)
- 15.4
- Current consumption at 400V (A)
- 8.9
- Suction mouth
- 2"
- Delivery mouth
- 1" 1/4
- Pump body
- Cast iron
- Impeller
- Brass
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Degree of protection
- IP 55
- Minimum flow rate (l./min.)
- 100
- Max. flow rate (l./min.)
- 320
- Min. head (m.)
- 44
- Max. head (m.)
- 57
- Jobs
- air conditioning systems
cooling systems
fire prevention systems
irrigation
pressurization systems
washing systems
water supply - Max. liquid temperature (°C)
- +90°C
- Height (cm)
- 34
- Width (cm)
- 46.9
- Depth (cm)
- 24.5
- Weight (Kg)
- 45.8
- Warranty (years)
- 2
Models and performances F 32/200BH-AH
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the F 32-40/200-50/160-65/125

Bearings
| Pump side motor bearing | 6307 ZZ-C3 |
| Opposite side engine bearing | 6206 ZZ-C3 |
Tree holding
| Type of seal | Single Mechanical Seal |
| Shrinkage DN1=450 DN2=350 | FN-24 |
| LP diameter | 24 |
| LP fixed ring | Graphite |
| LP rotating ring | Ceramic |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Cast iron GJL 200 EN 1561 |
| 2.1 - Seal holder cover | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Brass CW617N EN 12165 |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Motor holder | EN-AB 46100 aluminium |
| 6.1 - Engine cover | EN-AB 46100 aluminium |
| 7.0 - Lantern | EN-AB 46100 aluminium |
