D 20 (5m) - 1 HP three-phase clear water pump
Flow rate up to 250 l/min (15 m³/h). Head up to 20 m. 0.75 kW (1 HP) motor. 5 m cable with Schuko plug.
The D 20 submersible electric pump from the Pedrollo D series is particularly recommended for fixed installations with automatic operation.
Suitable for activities such as draining flooded areas such as basements and garages, emptying swimming pools and tanks, and disposing of non-sewage waste water.
It allows the drainage of clear or slightly dirty water with suspended solids up to 10 millimetres in diameter.
To ensure continuous operation, the D 20 requires a continuous immersion depth of at least 210 millimeters. Installation can be carried out up to 5 meters below the water level.
Pedrollo created this electric pump with a mix of cast iron, technopolymer, and AISI 304 and 431 stainless steel, guaranteeing strength and solidity.
The supplied power cable is 5 meters long.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 0.75
- Power (HP)
- 1
- Current consumption at 400V (A)
- 2.4
- Delivery mouth
- 1" 1/2
- Pump body
- Cast iron
- Impeller
- Technopolymer
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Degree of protection
- IP 68
- Minimum flow rate (l./min.)
- 25
- Max. flow rate (l./min.)
- 250
- Min. head (m.)
- 8
- Max. head (m.)
- 20
- Cable length (m.)
- 5
- Jobs
- drainage
drying up - Max. liquid temperature (°C)
- +40°C
- Height (cm)
- 34.4
- Weight (Kg)
- 11.9
- Warranty (years)
- 2
Models and performance D
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the D series

Bearings
| Pump side motor bearing | 6203 ZZ |
| Opposite side engine bearing | 6203 ZZ |
Tree holding
| Type of seal | Double mechanical seal in oil chamber |
| LM diameter | 14 |
| LM fixed ring | Silicon carbide |
| LM rotating ring | Graphite |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | MG1-14D SIC |
| LP diameter | 14 |
| LP fixed ring | Silicon carbide |
| LP rotating ring | Silicon carbide |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Cast iron GJL 200 EN 1561 |
| 2.2 - Suction cover | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Reinforced technopolymer |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
| 6.1 - Engine cover | Stainless steel EN 1.4301 (AISI 304) |
| 7.0 - Lantern | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Stainless steel EN 1.4301 (AISI 304) |



