-42%

D 10 (5m) - 1 HP three-phase clear water pump

Flow rate up to 300 l/min (13.2 m³/h). Head up to 16 m. 0.75 Kw (1 HP) motor. 5 m cable with.

€276.67 Tax included

226.78 Tax excluded

€477.02-42%

Make a purchase proposal

Your Offer is sent.

Your Offer is accepted, please check your inbox.

D 10 (5m) - 1 HP three-phase clear water pump
  • Use dot instead of comma

Loading

Description

The D 10 submersible electric pump from Pedrollo 's D series is suitable for activities such as draining flooded areas such as basements and garages, for emptying swimming pools and tanks and for the disposal of non-sewage waste water.

Due to its reliability, it is recommended for use in fixed installations with automatic operation.

It allows the drainage of clear or slightly dirty water with suspended solids up to 10 millimetres.

The D 10 can be installed up to 5 meters below the water level. For continuous operation, it requires a minimum immersion depth of 210 mm.

Pedrollo created this electric pump with a mix of cast iron, technopolymer, and AISI 304 and 431 stainless steel, guaranteeing strength and solidity.

Data sheet
Brand Pedrollo
Reference D 10 5MT
In stock 10 Items
Motor connection
THREE-PHASE
Power (Kw)
0.75
Power (HP)
1
Current consumption at 400V (A)
2
Delivery mouth
1" 1/2
Pump body
AISI 304 stainless steel
Impeller
Technopolymer
Number of impellers
1
Crankshaft
AISI 431 stainless steel
Check valve
No
Degree of protection
IP 68
Minimum flow rate (l./min.)
25
Max. flow rate (l./min.)
300
Min. head (m.)
3
Max. head (m.)
16
Cable length (m.)
5
Jobs
drainage
drying up
Max. liquid temperature (°C)
+40°C
Height (cm)
34.4
Weight (Kg)
11.7
Warranty (years)
2
Attachments

Data sheet D

Construction and operating characteristics. Working curves, limits of use and dimensions of Pedrollo D series pumps.

Download (1.4MB)

Models and performance D

GUY
Three-phase
D 8
D 10
D 20
D 30
POWER
KWHP
0.550.75
0.751
0.751
1.11.5

Construction data of the D series

Pump D cutaway
Bearings
Pump side motor bearing6203 ZZ
Opposite side engine bearing6203 ZZ
Tree holding
Type of sealDouble mechanical seal in oil chamber
LM diameter14
LM fixed ringSilicon carbide
LM rotating ringGraphite
LM elastomerNBR
Shrinkage DN1=450 DN2=350MG1-14D SIC
LP diameter14
LP fixed ringSilicon carbide
LP rotating ringSilicon carbide
LP elastomerNBR
Materials
1.0 - Pump bodyCast iron GJL 200 EN 1561
2.2 - Suction coverStainless steel EN 1.4301 (AISI 304)
3.0 - ImpellerReinforced technopolymer
4.0 - Pump shaftStainless steel EN 1.4057 (AISI 431)
6.0 - Motor holderStainless steel EN 1.4301 (AISI 304)
6.1 - Engine coverStainless steel EN 1.4301 (AISI 304)
7.0 - LanternStainless steel EN 1.4301 (AISI 304)
8.0 - Suction Grid/FilterStainless steel EN 1.4301 (AISI 304)