-42%

Dm 8 (5m) - 0.75 HP single-phase clear water pump

Flow rate up to 250 l/min (15 m³/h). Head up to 13 m. 0.55 kW (0.75 HP) motor. 5-meter cable with Schuko plug.

€263.23 Tax included

215.76 Tax excluded

€453.84-42%

Make a purchase proposal

Your Offer is sent.

Your Offer is accepted, please check your inbox.

Dm 8 (5m) - 0.75 HP single-phase clear water pump
  • Use dot instead of comma

Loading

Description

The Pedrollo Dm 8 submersible electric pump from the D series is among the best in the submersible drainage category.

It allows the drainage of clear or slightly dirty water with the presence of suspended solids up to 10 millimetres.

The Dm 8 electric pump stands out for its reliability for domestic and civil installations.

To ensure continuous operation, it requires a minimum immersion depth of 210 mm. It can be installed up to 5 meters below the water level.

The supplied cable is 5 meters long.

Data sheet
Brand Pedrollo
Reference Dm 8 5MT
In stock 10 Items
Motor connection
SINGLE-PHASE
Power (Kw)
0.55
Power (HP)
0.75
Absorption at 230V (A)
3.2
Capacitor
20 µF 450 VL
Delivery mouth
1" 1/2
Pump body
Cast iron
Impeller
Technopolymer
Number of impellers
1
Crankshaft
AISI 431 stainless steel
Check valve
No
Degree of protection
IP 68
Minimum flow rate (l./min.)
25
Max. flow rate (l./min.)
250
Min. head (m.)
3
Max. head (m.)
13
Cable length (m.)
5
Jobs
drainage
drying up
Max. liquid temperature (°C)
+40°C
Height (cm)
34.4
Weight (Kg)
12
Warranty (years)
2
Attachments

Data sheet D

Construction and operating characteristics. Working curves, limits of use and dimensions of Pedrollo D series pumps.

Download (1.4MB)

Models and performances Dm

GUY
single phase
Dm 8
Dm 10
Dm 20
DM 30
POWER
KWHP
0.550.75
0.751
0.751
1.11.5

Construction data of the D series

Pump D cutaway
Bearings
Pump side motor bearing6203 ZZ
Opposite side engine bearing6203 ZZ
Tree holding
Type of sealDouble mechanical seal in oil chamber
LM diameter14
LM fixed ringSilicon carbide
LM rotating ringGraphite
LM elastomerNBR
Shrinkage DN1=450 DN2=350MG1-14D SIC
LP diameter14
LP fixed ringSilicon carbide
LP rotating ringSilicon carbide
LP elastomerNBR
Materials
1.0 - Pump bodyCast iron GJL 200 EN 1561
2.2 - Suction coverStainless steel EN 1.4301 (AISI 304)
3.0 - ImpellerReinforced technopolymer
4.0 - Pump shaftStainless steel EN 1.4057 (AISI 431)
6.0 - Motor holderStainless steel EN 1.4301 (AISI 304)
6.1 - Engine coverStainless steel EN 1.4301 (AISI 304)
7.0 - LanternStainless steel EN 1.4301 (AISI 304)
8.0 - Suction Grid/FilterStainless steel EN 1.4301 (AISI 304)