CP 250A - 15 HP three-phase centrifugal electric pump
The Pedrollo CP 250A electric pump is particularly recommended for water supply, air conditioning or cooling systems, and irrigation.
Thanks to its simplicity and reliability, it is recommended for use in the civil sector but can also be used in agricultural and industrial contexts.
It can pump clean water and liquids that are chemically non-aggressive for the constituent materials.
We recommend installing indoors or in places protected from the elements.
Despite its simplicity, the CP 250A is a reliable product that will stand the test of time. Pedrollo used materials such as cast iron and stainless steel to make the pump robust and durable.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 11
- Power (HP)
- 15
- Absorption at 230V (A)
- 39
- Current consumption at 400V (A)
- 22.5
- Suction mouth
- 2"
- Delivery mouth
- 2"
- Pump body
- Cast iron
- Impeller
- Cast iron
- Number of impellers
- 1
- Crankshaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- No
- Degree of protection
- IP 55
- Minimum flow rate (l./min.)
- 100
- Max. flow rate (l./min.)
- 900
- Min. head (m.)
- 45
- Max. head (m.)
- 76
- Jobs
- air conditioning systems
cooling systems
irrigation
pressurization systems
tank transfer
water supply - Max. liquid temperature (°C)
- +90°C
- Motor voltage
- 400 V
- Height (cm)
- 39.2
- Width (cm)
- 57
- Depth (cm)
- 29.4
- Weight (Kg)
- 103
- Warranty (years)
- 2
CP 250 models and performances
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the CP 250A

Bearings
| Pump side motor bearing | 6310 ZZ - C3 |
| Opposite side motor bearing | 6308 ZZ - C3 |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | FN-32 NU |
| LP diameter | 32 |
| Fixed ring LP | Graphite |
| Rotating ring LP | Ceramic |
| LP elastomer | NBR |
Mat
| 1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
| 2.1 - Seal holder cover | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Cast iron GJL 200 EN 1561 |
| 4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |
