CP 250B - 10 HP three-phase centrifugal electric pump
Flow rate up to 800 l/min (54 m³/h). Head up to 57 m. 7.5 kW (10 HP) motor.
The Pedrollo CP 250B centrifugal electric pump is recommended for use in the civil, agricultural and industrial sectors.
It can pump clean water and liquids that are chemically non-aggressive for the constituent materials.
Pedrollo has created a reliable and simple product. It is particularly suitable for water supply, air conditioning or cooling systems, and irrigation.
Installation must be carried out indoors or in any case protected from the elements.
The CP 250B is made of materials such as cast iron and AISI 304 stainless steel which make the electric pump robust, solid and resistant.
The flow rate ranges from 100 to a maximum of 800 liters per minute and the range from 31.3 to 57 meters.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 7.5
- Power (HP)
- 10
- Absorption at 230V (A)
- 25.9
- Current consumption at 400V (A)
- 15
- Suction mouth
- 2"
- Delivery mouth
- 2"
- Pump body
- Cast iron
- Impeller
- Cast iron
- Number of impellers
- 1
- Crankshaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- No
- Degree of protection
- IP 55
- Minimum flow rate (l./min.)
- 100
- Max. flow rate (l./min.)
- 800
- Min. head (m.)
- 31
- Max. head (m.)
- 57
- Jobs
- air conditioning systems
cooling systems
irrigation
pressurization systems
tank transfer
water supply - Max. liquid temperature (°C)
- +90°C
- Height (cm)
- 39.2
- Width (cm)
- 32.2
- Depth (cm)
- 50.7
- Weight (Kg)
- 74
- Warranty (years)
- 2
CP 250 models and performances
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the CP 250B

Bearings
| Pump side motor bearing | 6307 ZZ - C3 |
| Opposite side motor bearing | 6206 ZZ - C3 |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | FN-24 |
| LP diameter | 24 |
| Fixed ring LP | Graphite |
| Rotating ring LP | Ceramic |
| LP elastomer | NBR |
Mat
| 1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
| 2.1 - Seal holder cover | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Cast iron GJL 200 EN 1561 |
| 4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |
