CP 220B - 4 HP three-phase centrifugal electric pump
The Pedrollo CP 220B centrifugal electric pump is recommended for use in the civil, agricultural and industrial sectors.
It can pump clean water and liquids that are chemically non-aggressive for the constituent materials.
Pedrollo has created a reliable and simple product. It is particularly suitable for water supply, air conditioning or cooling systems, and irrigation.
Installation must be carried out indoors or in any case protected from the elements.
The CP 220B is made of materials such as cast iron and AISI 304 stainless steel which make the electric pump robust, solid and resistant.
The flow rate ranges from 50 to a maximum of 450 litres per minute and the range from 21 to 32 metres.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 3
- Power (HP)
- 4
- Absorption at 230V (A)
- 12.6
- Current consumption at 400V (A)
- 7.3
- Suction mouth
- 2"
- Delivery mouth
- 2"
- Pump body
- Cast iron
- Impeller
- Brass
- Number of impellers
- 1
- Crankshaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- No
- Degree of protection
- IP 55
- Minimum flow rate (l./min.)
- 50
- Max. flow rate (l./min.)
- 550
- Min. head (m.)
- 18
- Max. head (m.)
- 38
- Jobs
- air conditioning systems
cooling systems
irrigation
pressurization systems
tank transfer
water supply - Max. liquid temperature (°C)
- +90°C
- Motor voltage
- 400 V
- Height (cm)
- 31.5
- Width (cm)
- 44.1
- Depth (cm)
- 23
- Weight (Kg)
- 36.2
- Warranty (years)
- 2
CP 220 models and performances
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the CP 220C-220B

Bearings
| Pump side motor bearing | 6206 ZZ - C3 |
| Opposite side motor bearing | 6204 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | FN-20 |
| LP diameter | 20 |
| Fixed ring LP | Graphite |
| Rotating ring LP | Ceramic |
| LP elastomer | NBR |
Mat
| 1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
| 2.1 - Seal holder cover | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Brass CW617N EN 12165 |
| 4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |



