CP 210A - 5.5 HP three-phase centrifugal electric pump
Description
The CP 210A electric pump from Pedrollo 's CP series is recommended for use in the civil sector due to its high reliability.
Pedrollo has created a simple product made of cast iron and stainless steel that lasts over time.
It can also be used in the agricultural and industrial sectors, but it must be installed indoors or protected from the elements.
The CP 210A is particularly recommended for water supply, air conditioning or cooling systems and irrigation.
The flow rate ranges from 50 to a maximum of 280 litres per minute and the range from 40 to 61 metres.
Data sheet
- Motor connection
- THREE-PHASE
- Power (Kw)
- 4
- Power (HP)
- 5.5
- Absorption at 230V (A)
- 14.8
- Current consumption at 400V (A)
- 8.5
- Suction mouth
- 1" 1/2
- Delivery mouth
- 1"
- Pump body
- Cast iron
- Impeller
- Brass
- Number of impellers
- 1
- Crankshaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- No
- Degree of protection
- IP 44
- Minimum flow rate (l./min.)
- 50
- Max. flow rate (l./min.)
- 280
- Min. head (m.)
- 40
- Max. head (m.)
- 61
- Jobs
- air conditioning systems
cooling systems
irrigation
pressurization systems
tank transfer
water supply - Max. liquid temperature (°C)
- +90°C
- Motor voltage
- 400 V
- Height (cm)
- 30.5
- Width (cm)
- 40.2
- Depth (cm)
- 25.2
- Weight (Kg)
- 31.2
- Warranty (years)
- 2
Models and performances CP 160-210
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the CP 210C-210B-210A

Bearings
| Pump side motor bearing | 6206 ZZ - C3 |
| Opposite side motor bearing | 6205 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | FN-24 |
| LP diameter | 24 |
| Fixed ring LP | Graphite |
| Rotating ring LP | Ceramic |
| LP elastomer | NBR |
Mat
| 1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Brass CW617N EN 12165 |
| 4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Cast iron GJL 200 EN 1561 |
