-45%

CP 160C - 1.5 HP three-phase centrifugal electric pump

Flow rate up to 200 l/min (12 m³/h). Head up to 32 m. 1.1 kW (1.5 HP) motor.

€287.86 Tax included

235.95 Tax excluded

€523.38-45%

Make a purchase proposal

Your Offer is sent.

Your Offer is accepted, please check your inbox.

CP 160C - 1.5 HP three-phase centrifugal electric pump
  • Use dot instead of comma

Loading

Description

The Pedrollo CP 160C centrifugal electric pump is recommended for use in the civil, agricultural and industrial sectors.

It can pump clean water and liquids that are chemically non-aggressive for the constituent materials.

Pedrollo has created a reliable and simple product. It is particularly suitable for water supply, air conditioning or cooling systems, and irrigation.

Installation must be carried out indoors or in any case protected from the elements.

The CP 160C is made of materials such as cast iron and AISI 304 stainless steel which make the electric pump robust, solid and resistant.

The flow rate ranges from 50 to a maximum of 200 litres per minute and the range from 20 to 32 metres.

Data sheet
Brand Pedrollo
Reference CP 160C
In stock 10 Items
MPN 44CT26CA
Motor connection
THREE-PHASE
Power (HP)
1.5
Current consumption at 400V (A)
5.7
Suction mouth
3.3
Max. flow rate (l./min.)
50
Min. head (m.)
200
Max. head (m.)
20
Motor voltage
+90°C
Width (cm)
26
Depth (cm)
37
Weight (Kg)
20.6
Warranty (years)
2
Attachments

CP 11Kw Technical Data Sheet

Models, performance curves and construction characteristics of the Pedrollo pumps of the CP 11Kw series.

Download (976.67KB)

Models and performances CP 160-210

GUY
single phase
CP 160C
CP 160B
CP 160A
CP 210C
CP 210B
CP 210A
POWER
KWHP
1.11.5
1.52
2.23
2.23
34
45.5

Construction data of the CP 160C-160B-160A

Section of the Pedrollo CP pump
Bearings
Pump side motor bearing 6304 ZZ
Opposite side motor bearing 6204 ZZ
Shaft seal
Type of seal Single Mechanical Seal
Pump side model FN-18
LP diameter 18
Fixed ring LP Graphite
Rotating ring LP Ceramic
LP elastomer NBR
Mat
1.0 - Pump Body Cast iron GJL 200 EN 1561
3.0 - Impeller EN 1.4301 stainless steel (AISI 304)
4.0 - Pump shaft EN 1.4057 stainless steel (AISI 431)
6.0 - Motor holder Aluminum EN-AB 46100
6.1 - Engine cover Aluminum EN-AB 46100
7.0 - Lantern Cast iron GJL 200 EN 1561