CPm 160C - 1.5 HP single-phase centrifugal electric pump
Flow rate up to 200 l/min (12 m³/h). Head up to 32 m. 1.1 kW (1.5 HP) motor.
The Pedrollo CPm 160C centrifugal electric pump is recommended for use in the civil, agricultural and industrial sectors.
It can pump clean water and liquids that are chemically non-aggressive for the constituent materials.
Pedrollo has created a reliable and simple product. It's particularly suitable for water supply, air conditioning or cooling systems, and irrigation.
Installation must be carried out indoors or in any case protected from the elements.
The CPm 160C is made of materials such as cast iron and AISI 304 stainless steel which make the electric pump robust, solid and resistant.
The flow rate ranges from 50 to a maximum of 200 liters per minute and the range from 20 to 32 meters.
- Motor connection
- SINGLE-PHASE
- Power (Kw)
- 1.5
- Power (HP)
- 1.5
- Absorption at 230V (A)
- 8.5
- Capacitor
- 31.5 µF 450 VL
- Suction mouth
- 1" 1/2
- Delivery mouth
- 1"
- Pump body
- Cast iron
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 1
- Crankshaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- No
- Degree of protection
- IP 55
- Minimum flow rate (l./min.)
- 50
- Max. flow rate (l./min.)
- 200
- Min. head (m.)
- 20
- Max. head (m.)
- 32
- Jobs
- air conditioning systems
cooling systems
irrigation
pressurization systems
tank transfer
water supply - Max. liquid temperature (°C)
- +90°C
- Motor voltage
- 230 V
- Height (cm)
- 26
- Width (cm)
- 37
- Depth (cm)
- 20.6
- Weight (Kg)
- 19.3
- Warranty (years)
- 2
Construction data of the CP 160C-160B-160A

Bearings
| Pump side motor bearing | 6304 ZZ |
| Opposite side motor bearing | 6204 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | FN-18 |
| LP diameter | 18 |
| Fixed ring LP | Graphite |
| Rotating ring LP | Ceramic |
| LP elastomer | NBR |
Mat
| 1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | EN 1.4301 stainless steel (AISI 304) |
| 4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Cast iron GJL 200 EN 1561 |



